Povertycove Posted September 14, 2018 Share Posted September 14, 2018 Is there any way to replace a water pump on a 1950 Dodge without removing the radiator? Link to comment Share on other sites More sharing options...
Joe Cocuzza Posted September 15, 2018 Share Posted September 15, 2018 It is doable but it is a lot easier with the radiator out. It is not that difficult to remove the radiator - only 6 bolts. But if you want to leave the radiator in...First thing to do, as suggested by a good friend of mine, is to tape a piece of cardboard over the radiator to avoid damaging it. Next, remove the bolts that hold the fan to the pulley and then remove the fan and the pulley. You should now have enough room to remove the waterpump. 1 Link to comment Share on other sites More sharing options...
Povertycove Posted September 15, 2018 Author Share Posted September 15, 2018 Finally got it and, as you said Joe, by removing the fan and pulley. Now the trick is going to be to put the new one back in. Sigh. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now