EDHupp Posted April 10, 2018 Share Posted April 10, 2018 Any advice on removing the cotton straps that attach the rear lever arm shocks to the axle assembly on the ‘30 model S? Link to comment Share on other sites More sharing options...
Hupp36 Posted April 14, 2018 Share Posted April 14, 2018 I will be back up North in May, If nobody helps you before then, I will look at my 30 and 31 to see how they are attached. Link to comment Share on other sites More sharing options...
EDHupp Posted April 14, 2018 Author Share Posted April 14, 2018 Thanks Hupp36, but I messed around with it enough and figured it out (broke one of them in the process though). I'm going to try to reproduce one. For anyone else that may stumble upon this looking for how to do this, the straps are held in by metal wedges from the bottom of the casting on the axle assembly. If you rap on the bottom side of it (where the green arrow is pointing in the pic below) several times alternating on both sides of the wedge, it will fall right out. Don't hit it where the red arrow is, thats where I broke the piece. Link to comment Share on other sites More sharing options...
AWISE Posted April 15, 2018 Share Posted April 15, 2018 EDHupp, Hi, I have reproduce the wedges for the Lovejoy, shock straps, I all so have the strapping. Andy's Garage 302-245-7276 andygarage@comcast.net The wedges are $40.00 plus shipping. Link to comment Share on other sites More sharing options...
EDHupp Posted April 15, 2018 Author Share Posted April 15, 2018 Andy, Thanks for the response, i’ve got someone working on reproducing the wedges right now, if that doesn’t work out, I’ll be sure to get ahold of you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now