Windshield cranking mechanisim for the mid 30s Mopar

[countrytravler]

A new product that our vendor just made. Going to road test it to see if it passes my test. They will be for sale once we know that they pass the road test.
It's a reproduction windshield cranking assembly that fits the following vehicles:

1935-36 Dodge cars
1935 second series and 36 Dodge trucks
1935-36 Chrysler
1935-36 Plymouth
1935-36 DeSoto

Will not work without modifications on the 34s, 37 cars and trucks and 38 and up for the trucks.

Edited June 2, 2016 by countrytravler (see edit history)

[JACK M]

Cool part.

There have been many asking on here about these.

[Sharps40]

Is that one for a truck or a car....I see the input shaft is splined instead of square with center screw for attachment of the crank handle like the 37 cars

Edited June 2, 2016 by Sharps40 (see edit history)

[countrytravler]

15 minutes ago, Sharps40 said:

Is that one for a truck or a car....I see the input shaft is splined instead of square with center screw for attachment of the crank handle like the 37 cars

I have the vehicles listed in my post. Show at your end?  Same for all cars and trucks for 1935 and 36. We have the 37 and 38s for sale @ 525.00    

 

Edited June 2, 2016 by countrytravler (see edit history)