jreeder41 Posted March 10, 2016 Share Posted March 10, 2016 Does anyone know what is used for the seal to the crank pulley? I've had no luck finding an actual seal for it. Thanks! Link to comment Share on other sites More sharing options...
MIClassicGuy Posted March 18, 2016 Share Posted March 18, 2016 I don't think there was a seal at all on our engine- If I remember correctly, oil just drains off the shaft into a trough, then into the pan from there.... Link to comment Share on other sites More sharing options...
ahdodge Posted March 21, 2016 Share Posted March 21, 2016 The guy that rebuilt my engine glued a modern seal to the timing cover. you have to cut down the "harmonic/main" pulley to fit with a lathe. I think it is directional, in that , as the crank pulley turns the oil is swept back into the engine timing compartment. If you are planning on taking the cover off, it is a devil of a job. You must be careful not to let the generator gear falls out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now