WTB Early 1930's Chrysler Hubcaps, 7.35"OD, 6.5"ID

[Gunsmoke]

I have a single Chrysler hubcap as shown (year/model unknown), looking for a full set for the steel artillary style wheels shown (from unknown make/model) which have a 6&5/8" hubcap hole opening. The cap shown fits perfectly, and is 7.3"OD and 6.55" ID along with spring loaded clips.  Will consider hubcaps in any restorable condition as I will likely restore them. I will also buy singles if a set is not available. Car shown is a '36 Chrysler Airstream which has similar looking wheels, not sure if those hubcaps are similar dimensions. I will also consider any Chrysler hubcaps that fit 6&5/8" opening.

[keiser31]

Looks to be a reproduction cap. The originals had a steel buck with a chrome plated brass skin over it. I believe that you can only see the reverse image on the back on the reproduction caps.

[Gunsmoke]

That's interesting K31. I would be happy with a repo (if this is such) or original, as long as it was Chrysler badged and fit hole size. Would also be OK 2 slightly different ones , a pair for driver's side and another pair for passenger side if need be. At this point I want to fill the holes and as time passes would keeping looking for full original set.  BTW, this one I show is very well made, seems to be galvanized steel (no signs of rust), it is heavy and in pretty nice original condition for 85 years old. 

 

 

 

 

 

 

\

[keiser31]

I believe that style is 1929.