Tder1 Posted November 12, 2015 Share Posted November 12, 2015 I know this has been kicked around but after searching the Board I can't find the answer I need. Is there anyone who makes Door and Pillar Strips that has the correct Steel or reinforcement molded inside the rubber like OEM? I bought some but am not happy with the performance. The Windows drag the rubber down and it's just a mess to get them to work right. Any recommendations or experiences appreciated. Link to comment Share on other sites More sharing options...
Pat Curran Posted November 12, 2015 Share Posted November 12, 2015 Check with Steele Rubber Products. They may have what you are looking for. Link to comment Share on other sites More sharing options...
68RIVGS Posted November 12, 2015 Share Posted November 12, 2015 Then one with the steel insert is the way the originals were made, and are a little more durable.Just make sure the steel track is free from any loose rust and corrosion before you install the replacement. A liberal amount of clear silicone sealant will help the replacement slide in easier, and also bond the new seal into the track once it cures, in addition to keeping moisture out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now