Mad_Bohemian Posted June 19, 2015 Share Posted June 19, 2015 (edited) I just got the intake plenum (at least that's what I call it) sandblasted since the paint was peeling anyways. I found some rustoleum textured paint that I was giong to use.. but then I started wondering if I should mayube use a high temp paint?? What do you guys think?? Edited June 20, 2015 by Mad_Bohemian (see edit history) Link to comment Share on other sites More sharing options...
Garnet & Gold Posted June 20, 2015 Share Posted June 20, 2015 Duplicate Color makes a wrinkle paint that should look original. It wrinkles during the drying process. You can use a hair dryer to speed up the process. Use a block to sand the high spots on the plenum after it is completely dried. You should be able to find a video on yuotube on doing the paint process. The paint is in a rattle can. Link to comment Share on other sites More sharing options...
Mad_Bohemian Posted June 21, 2015 Author Share Posted June 21, 2015 I had seen that wrinkle paint before... but couldn't rememeber who made it.The duplicolor black looks like original! Paint, dry, block sand and viola, good aas new! Link to comment Share on other sites More sharing options...
Garnet & Gold Posted June 21, 2015 Share Posted June 21, 2015 Super looking job. Link to comment Share on other sites More sharing options...
Digger914 Posted June 22, 2015 Share Posted June 22, 2015 I had seen that wrinkle paint before... but couldn't rememeber who made it.The duplicolor black looks like original! Paint, dry, block sand and viola, good aas new! Amazing what some elbow grease and a couple bucks worth of paint will do. Will look even better on the engine. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now