rpvought Posted October 23, 2013 Share Posted October 23, 2013 I need to find a diagram on how to hook my hand brake linkage up to the side of my manual 3 speed gear box that puts the brake to the driveshaft. Link to comment Share on other sites More sharing options...
Guest 1930 Posted October 23, 2013 Share Posted October 23, 2013 Look in your parts book if you have one, if you do not than tell everyone what size truck you are working on, maybe I have a book Link to comment Share on other sites More sharing options...
rpvought Posted October 24, 2013 Author Share Posted October 24, 2013 Look in your parts book if you have one, if you do not than tell everyone what size truck you are working on, maybe I have a book I have a half ton stock pick up. I believe its the smaller cube six,with a 3 speed gear box Link to comment Share on other sites More sharing options...
rpvought Posted October 24, 2013 Author Share Posted October 24, 2013 Look in your parts book if you have one, if you do not than tell everyone what size truck you are working on, maybe I have a bookI have a 1/2 ton stock pick up Link to comment Share on other sites More sharing options...
Guest 1930 Posted October 25, 2013 Share Posted October 25, 2013 I have a 1/2 ton stock pick up1938 Dodge truck parts book, if one of these is of no help or not taken well enough than let me know and maybe I can do better. Link to comment Share on other sites More sharing options...
Guest 1930 Posted October 25, 2013 Share Posted October 25, 2013 (edited) I found it interesting to see that a 5 speed was offered in 38 Edited October 25, 2013 by 1930 (see edit history) Link to comment Share on other sites More sharing options...
rpvought Posted October 25, 2013 Author Share Posted October 25, 2013 1938 Dodge truck parts book, if one of these is of no help or not taken well enough than let me know and maybe I can do better.great pics,but what I really need is a picture of the linkage hook up from the attached rod from bottom of handle back to where it hooks up to two plates that pull down on spring loaded rod. side view. thank you. Link to comment Share on other sites More sharing options...
keiser31 Posted October 25, 2013 Share Posted October 25, 2013 great pics,but what I really need is a picture of the linkage hook up from the attached rod from bottom of handle back to where it hooks up to two plates that pull down on spring loaded rod. side view. thank you.Probably similar to my 1931 DB trans setup....hope these help you out a bit. John Link to comment Share on other sites More sharing options...
countrytravler Posted October 25, 2013 Share Posted October 25, 2013 (edited) They also had a disk brake with pads on both sides on the bigger trucks. Edited October 27, 2013 by countrytravler (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted October 25, 2013 Share Posted October 25, 2013 (edited) This may not be the correct trans for this truck, but you will get the general idea how it works.From a 1938 Dodge 1/2 ton truck being restored. Edited October 26, 2013 by countrytravler (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted October 26, 2013 Share Posted October 26, 2013 Link to comment Share on other sites More sharing options...
countrytravler Posted October 26, 2013 Share Posted October 26, 2013 (edited) Just set the body on the chassis couple of minutes ago Edited October 27, 2013 by countrytravler (see edit history) Link to comment Share on other sites More sharing options...
rpvought Posted October 26, 2013 Author Share Posted October 26, 2013 [ATTACH=CONFIG]220047[/ATTACH][ATTACH=CONFIG]220048[/ATTACH]this pic is great thank you very much.I see two h shaped pieces coming from pin on side of trans, I only have one.looks like I'll have to fabricate one,thanks again. Link to comment Share on other sites More sharing options...
countrytravler Posted October 26, 2013 Share Posted October 26, 2013 From a 1937 1/2 ton Dodge Link to comment Share on other sites More sharing options...
rpvought Posted October 27, 2013 Author Share Posted October 27, 2013 all the help was great. I'm all hooked up and adjusted with my linkage. thanks a lot . rpvought Link to comment Share on other sites More sharing options...
countrytravler Posted October 27, 2013 Share Posted October 27, 2013 all the help was great. I'm all hooked up and adjusted with my linkage. thanks a lot . rpvoughtI like it when a plan comes together and it works and the person said thanks.Makes it worth while:o Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now