Steiger325 Posted October 16, 2013 Share Posted October 16, 2013 (edited) Hi. I am looking for some parts for a 26/47 Master Six, namely,1. A complete distributor, ( or model number of original one , I am assuming it is a Delco ) 2. Door glass , x 2 front3. Original Bumpers ( think mine are aftermarket )4. Dash Light switch assyShipping not a problem, I am genuine, this is scam free !No doubt there will be more but that will do for a start ! Many Thanks Edited October 16, 2013 by Steiger325 (see edit history) Link to comment Share on other sites More sharing options...
Leif Holmberg Posted October 16, 2013 Share Posted October 16, 2013 Distributor complete D17046 same on all 1926-1927 Buicks.Door glass can be cutted by you lokal glass shop without problem.Most of the bumpers outside US are aftermarket I think,just becuse a lot of the ones I have seen has been made in Stockholm Sweden or in Kopenhagen Denmark for the Swedish market.Combination"Dash light Head light Ignition switch"assy D1289,try E-bay Motors.Leif in Sweden. Link to comment Share on other sites More sharing options...
Steiger325 Posted October 16, 2013 Author Share Posted October 16, 2013 (edited) Distributor complete D17046 same on all 1926-1927 Buicks.Door glass can be cutted by you lokal glass shop without problem.Most of the bumpers outside US are aftermarket I think,just becuse a lot of the ones I have seen has been made in Stockholm Sweden or in Kopenhagen Denmark for the Swedish market.Combination"Dash light Head light Ignition switch"assy D1289,try E-bay Motors.Leif in Sweden.Leif Thankyou for this information, will continue the hunt for distributor a little easier now I have a Pt Number , I was trying to find the Delco Number preferably, which will be something like 633G Glass should not be much problem, and I guess new glass is going to have less scratches ! The bumper could just have been fitted later, as it is a California car which only came to England a couple of weeks ago. I have nearly worn my Ebay button out, but will just hang in there and keep looking, as you say something will show up if I am persistant, Thanks again Tim Edited October 16, 2013 by Steiger325 (see edit history) Link to comment Share on other sites More sharing options...
Leif Holmberg Posted October 16, 2013 Share Posted October 16, 2013 Tom.Check if you can use your 30 Buick dist on your 26,just becuse the dist cap and rotor are very expansive on 1923-1927 Buick:s.You can buy the later ones 1928-1930.S for a less of the price than for 1923-1927:s.Leif in Sweden. Link to comment Share on other sites More sharing options...
Steiger325 Posted October 16, 2013 Author Share Posted October 16, 2013 Ok Thanks I will have a measure up tomorrow Link to comment Share on other sites More sharing options...
Leif Holmberg Posted October 17, 2013 Share Posted October 17, 2013 This`s what`s in my Delco-Remy car application index.Leif in Sweden Link to comment Share on other sites More sharing options...
Steiger325 Posted October 17, 2013 Author Share Posted October 17, 2013 This`s what`s in my Delco-Remy car application index.Leif in SwedenMany Thanks, That should clarify the hunt, doesn't mean they will drop off trees though ! I will investigate my 1930 one, if that would fit I'm sure I will have no problem. Tim Link to comment Share on other sites More sharing options...
Leif Holmberg Posted October 17, 2013 Share Posted October 17, 2013 Just remember that the 1926 dist.gear or axle need some rebuilding to fit on 1930 dist..But I think it`s possible just becuse people have done it from 1925-1927 to 1928 Buick:s.Leif in Sweden. Link to comment Share on other sites More sharing options...
michaelod Posted October 24, 2013 Share Posted October 24, 2013 Many Thanks, That should clarify the hunt, doesn't mean they will drop off trees though ! I will investigate my 1930 one, if that would fit I'm sure I will have no problem. TimI have one from a 1929 Buick, inspected, cleaned, and painted that I am willing to part with if that will help. Thanks, Link to comment Share on other sites More sharing options...
Steiger325 Posted November 5, 2013 Author Share Posted November 5, 2013 Thankyou Leif for your help, I have actually found a reconditioned one in England ! Correct one for a '26. Some of us are born lucky !! however there is a lot of work to do before we make her growl. Body off now I think and get the hardware all reconditioned and sweet. I will keep you informed of progress. Cheers Tim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now