Dwight Romberger Posted August 24, 2013 Share Posted August 24, 2013 [h=5]Hi all,[/h]Do I miter the ends of the rubber run channel at the tops of the windows or is there a trick to make the turn?Thanks,Dwight Link to comment Share on other sites More sharing options...
michaelod Posted August 24, 2013 Share Posted August 24, 2013 Dwight,I shot some photos of the original way this was installed before I painted my car. It is a bit of a tricky cut, but here is how they did it from the factory.Thanks, Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 24, 2013 Author Share Posted August 24, 2013 Boy, That is downright strange.Why would they do that rather than a 45 degree miter? Link to comment Share on other sites More sharing options...
michaelod Posted August 24, 2013 Share Posted August 24, 2013 Perhaps it was just to save 3/4" of weather stripping? Might be a cost savings over 30,000 cars. That is the only reason I could think of that would make any sense. Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 24, 2013 Author Share Posted August 24, 2013 WOW Link to comment Share on other sites More sharing options...
Guest Posted August 25, 2013 Share Posted August 25, 2013 Same way on my Pontiac. It would be a considerable saving 3/4" x 2 per window x 6 windows (4 dr sedan with quarter windows) = 9" per car. How many closed Fisher bodies were built in 1930 alone???? Link to comment Share on other sites More sharing options...
jpage Posted August 25, 2013 Share Posted August 25, 2013 (edited) It appears to me that you're using the incorrect material to start with. Those cars used a metal or hard rubber channel lined with felt. In most cases the channel extended the length of the door sides and had a piece of soft "U" shaped rubber at the top . Some cars did have a channel at the top and usually the top channel was installed first and the sides butted into it, no miter. In wooden framed cars ,sometimes the channel had a tack through it to hold iot in place, but usually the garnish mouldings held the channel. The channel may also stick out a little from the mouldings. Make sure you're using the correct material, not foam rubber or some cheap substitute if you want your windows to operate properly. Your material looks like later (late 60's-70's) window channel. The correct channel for your car would be either no. 2-C (9/16 h.x 5/8 w.) or no. 10-A (17/32 h.x 5/8w.) available from Restoration Specialties in Pa 814-467-9842. Edited August 25, 2013 by jpage (see edit history) Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 25, 2013 Author Share Posted August 25, 2013 (edited) Hi Jim,I appreciate you keeping me on the straight and narrow!Some of the original weatherstripping survived in my car. I bought mine from Steele Rubber, but Restoration Specialties sells it as AS2538. It is a flexible flocked rubber. It looks like cheap foam rubber because I have a cheap, don't care if a drop it, made in a country I will not name digital camera.You guys are right. I guess that would be a significant savings. I just don't think like those we used to call "bean counters." I am installing mine with mitered edges.Dwight Edited August 25, 2013 by Dwight Romberger Added pic (see edit history) Link to comment Share on other sites More sharing options...
jpage Posted August 26, 2013 Share Posted August 26, 2013 The AS2538 is also a choice but it does not look like the channel in the photo. The As2538 is much thicker and is pretty stiff. It's a solid extrusion with a flange on the bottom and smooth sides with no bead at the opening. It also measures 15/16 across the bottom. Hope you can get it to work for you! Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 26, 2013 Author Share Posted August 26, 2013 (edited) Here's a better picture with the old weatherstrip pulled out of the car. Original one on the top. AS2538 on the bottom. Edited August 26, 2013 by Dwight Romberger (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now