Guest 4 bufords Posted August 31, 2012 Share Posted August 31, 2012 according to service manual in order to change ignitin switch you have to turn the switch to acc position insert paper clip in little hole.problem i have is the switch can't be turned to acc.tried couple of different keys which always worked before. thanks for any help on my 62 invicta,4 bufords from ct Link to comment Share on other sites More sharing options...
Guest 4 bufords Posted September 1, 2012 Share Posted September 1, 2012 i must have the only 62 buick that had to have the switck replaced,4 bufords from ct Link to comment Share on other sites More sharing options...
bhambulldog Posted September 1, 2012 Share Posted September 1, 2012 Try inserting the paper clip in the on position. Link to comment Share on other sites More sharing options...
JohnD1956 Posted September 4, 2012 Share Posted September 4, 2012 Can you turn the switch at all Don? If so, I'd try fully inserting that key and then pulling it back a hair at a time while trying to get to the ACC position. Otherwise if at all possible I guess I would remove the entire switch by removing the ring and pulling the switch out from behind the dash. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now