TomTIII Posted June 25, 2012 Share Posted June 25, 2012 My two-prong wheel puller isn''t going to work on my '48 Chrysler with a 5-bolt pattern. Is there a puller designed for that purpose? Link to comment Share on other sites More sharing options...
keiser31 Posted June 25, 2012 Share Posted June 25, 2012 The three legged puller is what you will need.... Link to comment Share on other sites More sharing options...
Guest cookie72-79 Posted June 26, 2012 Share Posted June 26, 2012 I solved that problem on my 48 for good, hopefully anyway. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted June 29, 2012 Share Posted June 29, 2012 Yes they made a puller just for Chrysler drums. I have one. It looks like a steel traffic cone with 5 bolt holes and a great big screw with a steel dog bone. The ends of the dog bone are all peened and squashed over. It has been beat on HARD many times but never fails to break a hub loose. I even made an adapter to pull wide 5 VW rear hubs. Link to comment Share on other sites More sharing options...
Guest cookie72-79 Posted June 29, 2012 Share Posted June 29, 2012 (edited) There are a lot of them on ebay right now. drum puller | eBayEDIT: I would get a good name brand on these puller's because these drums can be extremely tight and hard to pull off and a cheap puller may strip out before it gets the job done. JMHO Edited June 29, 2012 by cookie72-79 (see edit history) Link to comment Share on other sites More sharing options...
TomTIII Posted June 29, 2012 Author Share Posted June 29, 2012 Thanks all... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now