Guest popsride Posted February 13, 2012 Share Posted February 13, 2012 i am looking for a flywheel for a 1937 buick special 40 series.also what changes do i need to make to switch over to a 12 volt electrical system.any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
Larry Schramm Posted February 14, 2012 Share Posted February 14, 2012 (edited) I think that the majority of persons here would vote to keep the system 6 volt. To change over to 12 volt remember all of the bulbs, radio, etc, gauges, etc...If you are having problems starting, I would go to the basics for the starter like good grounds, large clean new cables, not the 12 volt cables in the stores today, ect.Take a look at this thread for some great information.http://forums.aaca.org/f115/new-battery-cables-like-new-car-322140.html Edited February 14, 2012 by Larry Schramm (see edit history) Link to comment Share on other sites More sharing options...
1939_Buick Posted February 14, 2012 Share Posted February 14, 2012 (edited) Agree about keeping 6 volts. Use the correct large thickness cables (not 12 Volt cables) & all terminals clean.Flywheel for a 1937 S40 is the same as 1934 to 37Group 0.666 part 1288174 (all of $15.00 in 1942)Try Dave Tacheny (he should give me a discount as I refer him so often) Area number is 763 now, not 612The Largest Vintage Buick gallery on the web - PreWarBuick.comThe best man on planet Earth for late '30s Buick parts is Dave Tacheny. Believe it! Mail your want list to him at 11949 Oregon Ave. N., Champlin, MN 55316, or call 612-427-3460. Edited February 14, 2012 by 1939_buick (see edit history) Link to comment Share on other sites More sharing options...
Guest Grant Magrath Posted February 14, 2012 Share Posted February 14, 2012 Like the guys say, keep it 6v if you can. You can hide a 12v inverter somewhere to power a stereo.CheersGrant Link to comment Share on other sites More sharing options...
chstickl Posted February 19, 2012 Share Posted February 19, 2012 agree with the afore said to keep it 6V. I had my 37 Coupe converted to 12V and it didn´t make too much improvement. Anyway, this is what needs to get done:1. rewind the generator coils - only few specialists can do that2. replace the voltage regulator3. rewind the starter solenoid - only few specialists can do that4. replace the ignition coil with a 12V one5. install a voltage divider to 6V for the gas gauge instrument6. replace all bulbsnote that I didn´t rewind the starter coils, so now the starter motor cranks real fast and on shouldn´t crank too long at a time to avoid overheating. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now