Lockhouse Posted June 26, 2011 Share Posted June 26, 2011 OK, I've lost the indicators and brake lights on my 52 Super.I changed the fuse and this didn't fix it, changed the flasher unit and this didn't either. I remover the inspection plate from under the hood and direct wired across the fuse terminals both front and back, still no luck.Any ideas what else I can check before I call an auto-electrician?Thanks,Andy Link to comment Share on other sites More sharing options...
Guest brh Posted June 27, 2011 Share Posted June 27, 2011 I am not familiar with wiring on a 52, but know those electrical gremlins very well. Both systems, brake lights and indicators are seperate?? If so it sounds like ya lost a ground some place. Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted June 27, 2011 Share Posted June 27, 2011 Check the lead from ignitation switch to fuse panel. Ben Link to comment Share on other sites More sharing options...
Lockhouse Posted June 28, 2011 Author Share Posted June 28, 2011 Cheers Ben - will do.Cheers brh - they are on the same fuse but it may be a bad connect from the ignition as Ben suggests. I will check. Link to comment Share on other sites More sharing options...
Lockhouse Posted July 4, 2011 Author Share Posted July 4, 2011 Just to say that the whole box of fuses I bought was faulty....indicators and brake lights now sorted. Link to comment Share on other sites More sharing options...
Guest Straight eight Posted July 4, 2011 Share Posted July 4, 2011 Were the fuses LUCAS, the kind that are known to leak smoke? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now