Guest scott mich bca # 6619 Posted July 10, 2000 Share Posted July 10, 2000 I'm looking for a working 1955 Power seat switch.<P>Thanks,<BR>Scott<P>------------------<BR> Link to comment Share on other sites More sharing options...
FireballV8 Posted July 13, 2000 Share Posted July 13, 2000 do you need a two way or four way?<BR> Link to comment Share on other sites More sharing options...
Guest scott mich bca # 6619 Posted July 13, 2000 Share Posted July 13, 2000 I think it is a 4 way. How can you tell?<BR>The switch I have seems to go forward & back,<BR>also up & down.<P>Thanks,<BR>Scott<P>------------------<BR> Link to comment Share on other sites More sharing options...
FireballV8 Posted July 14, 2000 Share Posted July 14, 2000 does the switch backing or swit6ch have five pins or three, the backing should have either three or five holes? Do you already have a switch?<BR> Link to comment Share on other sites More sharing options...
Guest scott mich bca # 6619 Posted July 14, 2000 Share Posted July 14, 2000 I do have a switch in the car. The problem is the seat oly goes forward & back. My mechanic said I need a new switch, al else is ok. I'll check the pin arrangment & let you know tonight or tomorrow.<P>Thanks, Scott<P>------------------<BR> Link to comment Share on other sites More sharing options...
Guest scott mich bca # 6619 Posted July 22, 2000 Share Posted July 22, 2000 The switch has 3 wires. What does that mean?<BR>Is the 3 wire on only forward & back? The 5 wire a 4 way. Makes sense.<BR>Scott<P>------------------<BR> Link to comment Share on other sites More sharing options...
old-tank Posted July 23, 2000 Share Posted July 23, 2000 Scott<BR>Next question: How many motors do you have? one or two?? One or both will be under the passinger seat cushion. I have a 2way switch but it looka like yours already works. Link to comment Share on other sites More sharing options...
Guest Posted July 25, 2000 Share Posted July 25, 2000 I am in need of a complete front seat for the 2 door /super or roadmaster for a 54 application on hydrolic system. If you can help? Thanks Al Link to comment Share on other sites More sharing options...
FireballV8 Posted July 25, 2000 Share Posted July 25, 2000 Scott<BR>You have a two way seat and it works fine. each motor has two wires on it and the third wire provides the power. Be carefull about your mechanic. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now