tbirdman Posted January 27, 2008 Share Posted January 27, 2008 Below are three pictures of a wiper arm for my 32 open. Looking where I can get the correct wiper blade for it. I'm unsure how the blade should connect. I have pictures of a 9" blade sold by Packards of San Diego but I'm not sure it's correct or how I would attach it to the arm. Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 27, 2008 Share Posted January 27, 2008 The blade just hooks into the slot in top-middle of the arm, and is held on by the pressure of the arm pushing the blade againt the windshield. Link to comment Share on other sites More sharing options...
tbirdman Posted January 28, 2008 Author Share Posted January 28, 2008 Speedster,OK, I was confused, because my current ones are attached by a small screw/nut. I actually have a wiper made with that type of hook on it and can see how it goes as you can see by the picture below. Link to comment Share on other sites More sharing options...
Johan Boltendal Posted January 28, 2008 Share Posted January 28, 2008 Actually, these are fitted the other way around, open end of wiper hook from inside of the slot in the wiper arm, towards the outside of the arm and then turned into the slot,done and fitted secure. This way they won't fall off at the first wipe and damage your window. Johan Link to comment Share on other sites More sharing options...
West Peterson Posted January 28, 2008 Share Posted January 28, 2008 Yup. What he said. Turn it around. Link to comment Share on other sites More sharing options...
tbirdman Posted January 28, 2008 Author Share Posted January 28, 2008 Well you guys are fantastic. I was a little concerned about the stability of the blade and the arm the way I had it. It's these little things that make this forum great. One problem down, countless more to go. Oh by the way...how many feet of tubing does it take to bend about 12' of line? Well if I'm doing it, about 50' However not once did I forget to put the fitting on before I flared the line so at least that's a positve. Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 28, 2008 Share Posted January 28, 2008 As Long as you are 'Having Fun', That's the Important thing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now