Jump to content

unimogjohn

Members
 View Profile  See their activity

  • Posts

    4,151

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by unimogjohn

  1. unimogjohn
    Tuesday morning, August 23rd, and we have a Greg Avanti report. "Nice morning John, Here's my progress. Pan is down. Suggested for you is before you remove the bellcrank pivot bearing, drop the tie rod ends (if you're using a pickle fork) while the bellcrank is rigidly mounted, then after the bearing is removed from the crossmember , even with the pitman arm reach rod and power steering ram still attached you can (at least I was) shove the steering arm forward to swing the bellcrank almost out of the way. With some tugging I was able to pull the pan down. Might scratch the paint on a Pebble Beach beauty. The dent worked out nicely using the handle end of my hammer. Called in my order for a gasket set today. Meanwhile, back at the Matheson engine......things are happening."
  2. unimogjohn
    It is Monday, August 22nd, AM. Greg is working on his Maroon Avanti. Remember that clutch issue? Well the troubles do expand with our old cars. "John, here's the latest on the maroon car. Noticed a dent in the bottom of the oil pan. Not sure if it is an old dent or if I did it while supporting the rear of the engine for the clutch repair. Can't risk starving the oil pump, so I can't rest until that dent is gone, so Nate and I are dropping the pan. Not exactly a day at the beach. Exhaust, starter, the clean oil that I'd just changed , and the steering bellcrank must go. Don't forget the pan breather pipe and dipstick bracket as well. Oil filter might stay. At this point the bellcrank is our hangup. That pivot bearing is down and out (don't overlook the grease fitting), bellcrank is loose but it won't move out of the way until some or all of the ball joints are knocked loose (power steering ram uncertain). The pan is hanging but won't come out until that pesky bellcrank is out of the way. To be continued. GREG.
  3. unimogjohn
    Still Sunday, Pacerman/Joe sent me a link to a French site. It shows a 1927 McLaughlin Buick as well as cars I have never seen. Worth the 11 minutes to view it.
  4. unimogjohn
    It's Sunday morning. Headed over to Camaro Steve's place for a BBQ. Great friends and food. Barney, the 1953 Ford F100, is home. Steve says that he is going to do the remaining work. He has a turn signal light in the dash not work, the gas gauge on the dash is not working, and there are some minor leaks that need to be looked after. He said that it runs and drives really good. Steering is light and easy. He took it to 65 mph, and it was waiting for more pedal. So here are a few pics of Barney and the other cars that showed up. I included a pic of Steve's take home detective police car.
  5. unimogjohn
    Transmission - I don't see reverse!
  6. unimogjohn
    Still Friday, early PM. We just got finished changing the coolant in the Porsche. What a job! A major effort to drain all the coolant out of the car, all 6 or more gallons. Had to remove hoses to drain the heater, two radiator, engine and all the pipes. Took us a while to figure out the vacuum refill tool, but when that was done, it filled the coolant with ease. Now I know how to use it. Alan just left after three hours of work. And I finally got to see the engine, err well, sort of. The car is 9 years old and has only 18,000 miles on the clock.
  7. unimogjohn
    It's Friday, August 19th, and another car day. Alan brought over his 2007 Porsche Boxster yesterday. We put it on the lift and changed the oil. Not a difficult job. Today we are going to change the coolant. We are are gong to use my new special extractor/filler tool. I bought this to do the coolant on the Passat. This will be a learning day. Should be fun. Here are a couple of pics of the car. Opened the trunk expecting to see the top of the engine, what is up with this? Only visible from the underside of the car.
  8. unimogjohn
    As promised here are a few pics of the Museum of Flight in Seattle, WA. They have really expanded it over the years and now have a fine collection of aircraft. Not all the aircraft are under cover, but most are. They just completed a huge open hangar so more planes are under cover and somewhat protected. Got to walk into the Concord. Boy, that is a narrow, but long airplane, very impressive. The first Boeing 747 test plane was cool also. And Greg's company, the Wright Experience, had a plane there also. Nice to have a connection to the museum. I did work for Boeing for almost 30 years, so it was a coming home of sorts.
  9. unimogjohn
    Bernie, I take it that the second pic is of the throw out bearing. Are you going to have to make one as they look to be well used up? What shape is everything else in? Or will this just be plug and play with most of the parts. It sure looks like the car was taken apart a long time ago. Do you know anything of its history?
  10. unimogjohn
    And we have a report from Greg also. "I've been keeping busy. The maroon Avanti is still on the lift . Clutch and transmission are back in place, but things just don't go as smoothly as they did in the old days. Case example: Went to reinstall the drive shaft and found that I'd lost some needles from the u-joint. With no spare at hand I tried the usual suspects for a new joint. With part number revisions , the discarding of their old catalogs, inexperienced counter help and computer assist they were successful in ordering in the wrong one. That cost me a day, but a note to our (every Studebaker owner) good friend Bob Johnstone, he supplied me with enough background information to locate the right one (in stock). Last night I got it and and driveshaft installed. A few more things to go yet, linkage, exhaust down pipe, backup light switch yet to go, little things that should be easy (?!) . I work on it when I feel like it. Otherwise, busy here at work. We're getting ready to mount the engine in this latest Curtiss Jenny. I've test run it on the stand for a while. I'm also getting serious about finishing up the Matheson. The owner is looking forward to getting the car finished. So am I. Stormy weather. GREG."
  11. unimogjohn
    It is Thursday, August 18th. Well, we made it home from our little trip to Seattle. It was fun, but it is good to be home. We did go to the Museum of Flight. I did take pics and will post them tonight or tomorrow morning for all the airplane buffs. I was most impressed with the WW 1 aircraft. This morning I cranked up Brownie the Van and headed over to Dan's shop. He looked over the truck and we decided on the patch panels to order. When I got home I ordered them to the tune of about $250. I did see Barney, the F100 P/U, too. He looks really good. He now has exhaust and the alignment was done. It still has a couple of more things to connect up. A couple of gauge issues and Dan has to weld up brackets for the parking brake system. He hopes to have it done tomorrow PM. Steve told me that it drives really nice, Cannot wait for my ride on Saturday.
  12. unimogjohn
    John,your Avanti looks great. Does she drive as hood as it looks? Keep posting pictures for us. Tuesday, August 16th. Only a couple more days in Seattle, and we get to go back to Virginia. Fun, but we miss the farm after a few days. I did order new door gaskets for the 1979 Chevrolet Sportsvan. Two front doors, side slider door and the two rear barn doors. Bought them from LMC Truck. I think that $163 is a good price. I plan on getting the van to Daniel next week to have him decide on what patch panels are needed for the body from LMC and what he needs to make. I did send him some pics of the worst of the damage so I will post them here too. The rear of the van is the worse. My plan is to make the van presentable again and start using it on a regular basis. The interior is OK for a conversion van, but it does need some new front seats. I will post pics of the interior in a few days. This is not a show piece project for sure.
  13. unimogjohn
    Still Sunday, and we have a Barney report. "We got oil leak stopped, freaking oil pan bolts, tightened them this morning, loose by lunch time, tightened again. We think we got transmission kick-down cable adjusted correctly so put some gas in it and went round the block. Barney goes to muffler shop for Tuesday install and alignment. Almost all wiring done and gauges are working. Dan has a couple of minor wiring issues to get done. Should be good after muffler shop, at least for now; and will be able to bring him home."
  14. unimogjohn
    Sunday, August 14th. We are still in Seattle, WA and having a great time. I did get a short report from Camaro Steve on his '53 F100 P/U. He said: "Got new master cylinder in and brakes are good. Oil leak somewhere. Dan repaired floor plate, I got headlights in, removed old parking lights. Still worried about adjusting tranny kick down cable. Drove it up and down his driveway steering good, plenty of pep." So it looks like the Barney will be out of the shop and back home in a day or so. Will take pics when we get home. Cannot wait to see how he runs and drives.
  15. unimogjohn
    It is Wednesday, August 10th. Spent about four hours this morning working on the Avanti. Put in new spark plugs to see if that will cure the slight misfire. All the plugs look good, but one did have a little piece of carbon wedged in the electrode. They all had good color. Put back on the fan, degreased the engine as best I could. The only leak that I can see in the power steering is the control valve. It seems to be leaking around where it is connected to the steering rod that goes into it. I have ordered a kit to rebuild it. The kit consists of two seals. So for $30 I am getting two $5 seals. Oh well. There is a rebuild service for the valve also, $250 exchange. What is up with that? Daniel, the Barney fabricator, has agreed to do the body panel repair on Brownie the van. I will take it to him in a couple of weeks as we are heading off on vacation for a week.
  16. unimogjohn
    Bernie, you just gave me a heart attack! You are a very brave man.
  17. unimogjohn
    Still Monday, Suzie M. sent me a couple of pics that she found in an on-line newspaper. One is of Alice and I putting up the top to the 23 McLaughlin Buick, and the other is Suzie looking over the special features of Dave B. 1928 Buick runabout. Her car, Homer, a 1926 and all original, yellow and green body (paint is original also). And here is a link to the article (but I have no idea how long it will be active). http://www.lehighvalleylive.com/allentown/index.ssf/2016/07/buick_club_of_america_rolls_in.html#incart_river_index
  18. unimogjohn
    Type F in the transmission. I used the stuff from Wally's http://www.walmart.com/ip/Super-Tech-Automatic-Transmission-Fluid-Type-F/16213434 But others make it also, Mobil, etc.
  19. unimogjohn
    JW, glad that you are still following along. Post some pics of your Avanti on the blog. Pls. feel free to add anything you want. I will take a look at the water pump and decide what to do. Thanks for the advice. I did order some new spark plugs for the Avanti. One thing that is not expensive on the car. And I got Brownie, the 1979 Chev Sports Van, out on the road today. Starts and runs great. I think I am going to give it to Daniel the fabricator to put on some patch panels and make the van whole again.
  20. unimogjohn
    Stil Monday. Camaro Steve is still pressing ahead on his F100. He worked with Daniel, the paid help, most of the day Sunday. Here is what he got done. He thinks that he may get it home at the end of the week. The note is kinda cryptic, but you get the idea. "yep, got front bumper on. wired rear tail lights and plate light. rear shock mounts are installed(welded in by Danny). steering column secured and connected, all worked but indicator light in dash, needs some tweeking. front supports under hood installed, firewall to front grill area. removed master cylinder, going to get new one. not bad for six hours of work." And tonight I painted the Avanti fan blade. The primer had dried after about five hours, so put on a couple of coats of the orange. I will see what it looks like in the morning and decide is I should add a couple more light coats. No runs that I can see. I am sure the factory did not put multiple coats of paint on engine parts, so I will probably just keep it like it is now unless I find spots that I missed.
  21. unimogjohn
    Monday, August 8th. Worked on the Avanti this morning. Going to change spark plugs as I have a miss in the engine. So I had to take off the air filter assembly to get to four of the plugs. While there I decided to take off the fan and am going to paint it back to the factory color, orange. Spent an hour or so cleaning and wire wheel removal of the old black paint. Got it all cleaned up and put on a coat of primer. Decided on the color of orange, it is a close match to the supercharger orange.
  22. unimogjohn
    Bernie, congratulations! I think.......... Can hardly wait to see all the bits and what you will make of them at the end.
  23. unimogjohn
    Sunday, August 7th, AM. Up early as we have to unload two tons of wood pellets from the trailer and move them to the back deck of the house for winter storage. I use the little Kubota tractor and take 10 sacks at a time. Will take us an hour or so. Camaro Steve is coming over to help. Speaking of Camaro Steve, he worked on Barney, the F100 Ford P/U yesterday. He and Daniel got the engine running. And the driveline is in too. Only some little things to do now to have a driving machine. The front brakes are giving them fits, would not bleed out. They are going to get a new master cylinder to see if the old one is defective. And yesterday we had a nice morning to off I went in the Jaguar to the little cars and coffee event. Getting to know everyone now so it is fun to go too. Some new cars showed up. Here are some pics of the new iron.
  24. unimogjohn
    Chris, yes, the Studabaker transmission folks say I have to adjust the pressure regulator, which is internal to the transmission. But there is an access port to get to it. I have the pressure gauge to do the work, just have to study up on how to make the adjustment. The regulator tells the transmission when to shift. The controller for the regulator is a rod from the carb, called the bell crank. It also has to be adjusted correctly. But today, Friday, August 5th, I am chasing oil leaks. With the car up on the four post lift I can raise it up while running and watching everything from bleow. The fuel pump now appears to not leak, at least at idle. But I did notice quite a bit of oil coming from on top of the engine. Seems that a plate on top of the block is leaking. I have no idea what it for, it is just a hole in the block. The cover plate was on tight, so I decided that a new gasket was in order. So I made a new one and put it on. Will wait until tomorrow to start the engine to see if I can see any seepage. The engine chrome valley plate also has a gasket, which has probably never been replaced. I may pull the intake and replace it. It does not look too difficult. Will probably take a couple of hours. I have gaskets for the timing cover, but it does not look like it is leaking. So I may just leave it alone for now. I don't think that the engine has ever been touched, with only 44,000 miles on it, I doubt that any work has been done on it since it has been born back in January of 1963. Here are pics of the plate repair.
  25. unimogjohn
    Thursday, PM on August 4th. Spent some quality time on the Avanti this morning. Put it up on the four post lift and let it run for about fifteen minutes. I figured that it would be long enough for me to tell what was puking oil and ATF. Found out that the fuel pump gasket is weeping and the control valve for the power steering is too. There is also a massive leak coming from the rear of the oil pan, either the pan gasket itself or the crank shaft gasket. I tightened up all the fittings on the control valve to see if that cures some of the weeping issues. I tighten up the two bolts to the fuel pump and will see tomorrow with a run test if it continues to leak. If it continues I will remove the power steering pump and replace the gasket on the fuel pump. I have a spare fuel pump so may replace the pump also. I also have a rebuilt power steering pump that I will put on also. I have ordered a oil pan and crankshaft gaskets; and a "sneaky pete" tool to r and r the crankshaft two piece gasket. Looks like I have to disconnect the exhaust down tubes, starter, and maybe the steering arm to get the oil pan down. Will have to dig out the manual on that one. The gaskets should be here on Monday. In the meantime I can do some of the other stuff over the next couple of days. Pics of the fuel pump dripping and the wet power steering control valve.
×
×
  • Create New...