Jim Cannon
-
Posts
2,182 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Jim Cannon
-
-
Bad grounds.
-
1
-
-
1 hour ago, telriv said:
I just bought 2 kits from my local NAPA jobber.
Are you sitting down.
They listed for $187.00 + each & cost me 107.00 + each.
Time for a change.
Tom T.
RockAuto has a carb kit by Standard Motor Products for $35.
They have a Walker kit for $46.
NAPA is running a 20% off promotion today with the promo code TAXES20, for orders of $125+. Order online, pick up from your local NAPA, or ship to you. No shipping charge of $35+.
-
2
-
-
5 hours ago, RivNut said:
Did you plug the crossover passage at the point where the intake manifold on the bottom and meets the head or at the top where the carburetor gaskets are?
At the top. With lead plugs that can be easily drilled out at some time in the future, if required.
-
16 hours ago, RivNut said:
@carbking Jon, I need a kit #859 for a 1964 Buick 425 with a Carter AFB. I’ve rebuilt a couple of AFBs years ago, but did nothing to make the carburetor look good. Are there any trade secrets you can reveal about restoration in addition to rebuilding? Let me know the best way to get you the $$ for the kit.
Ed
Ed, I bought a 15 Liter ultrasonic cleaner big enough to hold the AFB. Huge. I use it for other carbs from other cars, too. It heats the cleaning solution and has 2 different ultrasonic patterns that it runs on a timer.
The AFB on my '63 was last done about 12 years ago, so I will probably pull it apart and clean it with the ultrasonic cleaner just to refresh it. These carbs have a number of very fine vent holes, bleed holes, etc. that don't do what they are supposed to do if they have gas residue, gum, varnish, etc. dried up in them. I picked up a few kits from NAPA a few years ago, so I'm in pretty good shape there.
I had a vacuum leak where previous owner did not use the stainless steel plate on the carb. When I added it, I sandwiched the stainless plate between two conventional gaskets, to ensure no vacuum leak. I also plugges the little crossover passage to keep heat off the base of the AFB. YMMV.
-
1
-
-
John, you are making things way more difficult for yourself than they need to be.
The main difference between the '64-65 Bendix vs. Delco booster is the depth of the hole in the piston on the Master Cylinder that goes on it. One is deep (like 1") and one is shallow (like 1/4"). Just get one of the boosters that you like and then get the MC with the correct hole depth to match.
At the same time, you can go with the dual master cylinder that matches the booster you got and convert the car to a dual system. That's up to you.
I had my '63 booster rebuilt and put a dual MC on it. It works great.
If you use a MC that is later than a '63, you will have to add a port for the brake light switch (or make other provisions for the brake lights inside the car on the brake pedal arm).
-
3 hours ago, Bobba6 said:
Do you still do the CD'sfo Rivera?
Yes. The Dealer Service Bulletins are $10 each for '63 and '64. The '65s require 2 CDs, cost $12.
I also have the '63 Buick Master Parts Book on CD for $10.
Plus shipping is $10 for the entire package (up to 4 CDs).
If you don't like CDs, I can put them all on a small USB thumb drive (flash drive) for an extra $2.
Payment via PayPal to 63Rivvy (at) gmail (dot) com
Thanks!
-
On 9/25/2023 at 12:39 AM, cquisuila said:
thanks
no this is a 425
I have tested the flow in the radiator many times and it circulates
So this is a 1966 Riviera with the 425 CI engine?
Use the infrared thermometer gun to measure the temperature of the water outlet when hot.
Have you now installed a 180 degree-F thermostat?
-
1
-
-
14 hours ago, Cornpanzers Riv said:
It is the original Carter.
Do you have the stainless steel plate under the base of the carb, with a carb gasket between the intake manifold and the plate?
My stainless steel plate was missing and it caused performance issues like you are experiencing.
I actually sandwiched the plate between 2 carb gaskets when I installed it. Made all the difference.
-
What carb do you have on the engine? Original Carter AFB? Aftermarket Edlebrock AFB lookalike? Something else?
-
I agree with Tom. Confirm that the "square o-ring" is in place on the neck of the '63 Master Cylinder, where it slides into the booster, and that it is sealing well. Later MCs have the groove for this o-ring but do not require the seal like '63.
The '63 uses external vacuum storage for reserve (the big can on the inner fender). Later years have the vacuum storage internal. Pretty easy to confirm the can does not have a leak.
If your '63 brake pedal holds some pressure on the MC input, it will quickly bleed off your vacuum reserve. Make sure the pedal retracts freely.
-
1
-
-
Ed, my '63 had a similar problem when I first got it. I traced it down to an intermittent vacuum leak where the carb mounts to the intake manifold.
My car has the Carter AFB and it was missing the stainless steel plate between the intake and the carb. Your Rochester did not have that plate, but you can look for a vacuum leak at the base. Check your gaskets, maybe try a double gasket for extra conformance to an irregular surface.
Also check proper vacuum advance on the distributor and make sure you are on the correct vacuum port on the carb for your year. Most carburetor problems are ignition problems.
-
I thought the loose-fitting spare tire cover looked very sloppy and detracted from the look of the trunk. Buick would not let a new car go out with a cover fitting like that.
For this kind of money, all of the hose clamps everywhere should have been the correct style.
And one of those fancy period-correct Delco reproduction batteries should be in there under the hood (with the positive cable on the radiator side).
It looks like it has the incorrect radio.
-
2
-
-
In a car with Saddle interior, the black steering wheel looks odd.
Why does no one know that the grills up by the cowl, behind the hood, are supposed to be painted body color, except for the U-shaped bit that sticks up?
-
3
-
1
-
-
On 1/7/2024 at 9:30 PM, telriv said:
I have one that is brown & tan.
It's been off the car for about 40 years.
I'll look at it's overall condition & get back to you IF interested.
AND, NO I DON'T have a camera.
Tom T.
The brown and tan steering wheel is correct for the '63 with Saddle interior. That's what my car has.
It looks very good.
-
I am rejoining this discussion late...
For a "modern improvement", how about throttle body EFI?
It is hard to accelerate our massive cars without using a lot of fuel, and hard to pull it up a hill, but it seems to me that EFI could help you do it for the least amount of fuel possible. There will be no fuel percolation when you shut down the hot engine. No choke to stick open or stick closed.
I have seen EFI kits now that are more aimed at DYI installation.
I'll bet a few of you guys have done it on a nailhead???
-
1 hour ago, RivNut said:
I just talked to the counter guy at the local O’Reilly parts store. I called and told him what I found on their website and would like to order one. He looked it up and said it’s a special order. Me: From your warehouse? Him: No, from the manufacturer. Me: That’s typical.
It’s not going to happen unless some discovers a cache of NOS ones on the top shelf, behind an old desk, which is covered with a tarp, and stacked with old personnel files, which are history because everything is now computerized.
Wait a minute, guys... Don't cross up the WIX number that matches the NOS filter, with the flange on top with the WIX number for the basic 16x3 racing filter.
I am sure you are not going to get the original style filter any more.
But I do think you will find the basic 16x3 racing filter 46974R, because it's less specialized.
-
Ed, that NAPA filter number is indeed a WIX number. That's where I first found it, on the WIX website. They say it is a Racing Filter.
O'Reilley also has it in their online system as Special Order. Rockauto does not.
I have 2 NOS filters here, a lifetime supply, so I am not going to order one. I was just trying to get people the information that could help them.
-
1
-
1
-
-
I have one of those Fram filters, too, new in the original box. I have never used it because I thought the black rubber flange ring looked better with the red filter housing. The Fram rubber flange looks orange to me.
-
2
-
-
On 1/7/2024 at 7:53 PM, RivNut said:
Scroll up and read my reply ti LimoLarry. In a nut shell you’re not going to fin any unless someone has some new old stock.
OK, I thought that you guys found an air filter for another vehicle that was round and roughly the correct diameter and height, but it was missing the rubber flange around the top, so you had to make your own flange and stick it on. Am I remembering that wrong?
That's the air filter make and number I was trying to get from you guys.
I understand that the exact correct original style air filter is no longer available.
-
I have some '63 literature that shows the deluxe interiors with artist's renderings. They are not very clear. I don't have anything that shows the standard interior. A footnote says that some colors are available in all vinyl. See attached scan.
Photos of actual cars may be more clear.
-
1
-
-
13 hours ago, RivNut said:
I’ll preface that with a never. I’ve talked with James at Bestoffercounts and Steve with CARS. WIX. was the last manufacturer. They’ve bee purchased by a large German company. That company has no intention of producing anything that won’t put at least one of each of there products on the shelf every store in a chain. Just think how many NAPA, AutoZone, O’Reilly, and Advance Auto stores there are; way more than the number of stock 63 & 64 Rivieras out there. In other words “It ain’t gonna happen.”
Best thing to do is put an aftermarket unit on your car, clean the old stock one you have to the best of your ability, and save it for the next show & shine. It won’t be part of your driver any longer.
Ed, which aftermarket filter will fit? Can we get a manufacturer name and part number?
Does it fit in the original housing?
Are you thinking something like a K&N filter?
-
On 12/20/2023 at 4:38 PM, Jim Cannon said:
This is a spambot post by an AI bot that is messing with us. Ignore and delete.
The post I refer to above has been deleted.
-
This is a spambot post by an AI bot that is messing with us. Ignore and delete.
-
I should have said new technology in cars. There are challenges putting it in a moving 12 volt car compared to in your stationary living room. And as pointed out by others, really expensive so not a lot of demand.
Front turn signals-1963 Riviera
in Buick Riviera
Posted
When you mess with these old cars long enough, you've "seen it all".
On my '63, the sockets that the bulbs plug into became loose and a bit corroded from the reflector portion. That messed up the grounds. I had to go in and add dedicated grounds to each socket.