mikhett

Im looking for a hood for a 1962 Ford Galaxie 2 dr hardtop.Thanks

I would buy a bead roller and make my own.I did it on my 62 galaxie restoration.Bead roller,mig welder and patience.

I bought a y block distributor from NAPA and the distance from the bottom of the gear to the end of the shaft is exactly 1 inch.Is the long enough to engage the oil pump drive?thanks Mike

completely restored rust-free xl.everything mechanical is new or rebuilt.390 v8 holley 4 bbl carb new brakes lines etc,car is white.7 year restoration completed in 2007.rebuilt engine,cruise0matic tranny ,new tires.over 15,000 invested.best offer.mike e mail for pics mikhett@optonline.net.

Im selling a brand new shiny chrome 56 ford fairlane airplane hood ornament.bought new dont need it cost me 160.will sacrifice 140 plus the ride.Mike

Thanks Lou.PPG concept I plan on using that on my 62 ford galaxie.It will be Wimbledon White.Did you cut and buff? Thanks Mike

WOW! I cant believe it.I threw my non working unit in the trash.Mike

Hi Southpaw,What brand of paint did you use.? Was it single stage or bc/cc.Thanks Mike

Will the trunk and fenders from a 53 merc fit a 54.Both are 2dr hts.Thanks

GREAT JOB!Rick.Im restoring a 1962 ford galaxie xl from the ground up .Ive been at it for 3yrs now almost done.It will be painted corinthian white(original color).Did you paint yours in base/clear or single stage? Thanks Mike

I bought a repo steel (galvanized)54 merc tank from AUTO CITY CLASSICS ISANTI MN. Cost me 275.00 with a new sender. Im very happy! Mike

I just dropped my tank and it was rotted around the sending unit area.Will a 54 ford fit? Are they being repo'ed? Thanks Mike

This may be a dumb ? but i cant seem to get the inner alum headlight ring out from the outer sheetmatal ring. I see 3 spring clips but when i squeeze them together and trey to remove thru the front they get stuck on the outer lip. HELP, Thanks

My front x member behind the rad is rotted and i need to replace it.There is no engine or trans in the car. I need to rebuild the frt end so should replace the x -member first?I dont have a torch but i have a 220v mig welder and grinder with grinding wheelS so i can cut out the x member.I will also have to cut the gussets from the x-member and reweld them.Has anyone ever done this? Thanks Mike

These exh manifolds came off a 66 390 fairlane gt.They will fit fairlanes mustangs and galaxies with the ford fe 352-390 428 cylinder heads. excellent condition no craclks 175.00Email Mikhett@optonline.net

Im looking to buy a ps pitman arm for my 62 gal that has m/s.thanks mike mikhett@optonline.net

Does anyone have a 62 ford galaxie ps pitman arm for sale or do you know where i can buy one?thanks mike MIKHETT@optonline.net

ive got three(3) buick chrome rally rims fs 15 " no center caps i can e-mailpix asking 175.00 for all 3 or bo mike in nj

Ive got three (3) buick chrome rally rims off a 65 buick wildcat no center caps chrome is beutiful no rust there is one ding one one of the rim lips and one little gouge on another lip 175.00 for all 3 or b.o. mike i can e-mail pix

i need the b.u.i.c.k. letters for the hood of a 69 buick gs 400 conv. i also need the trunk lip molding thanks mike

im looking for the potmetal molding that goes along the bottom of the trunk for a 69 buick gs400 convertible, thanks mike

I need both front fenders for a 62 ford galaxie 2 dr ht.The bottom 4 inchs on both sides are rotted a pair of patch panels would be welcome also. mike