LR1970

Powerhouse Collection - Full size sectioned Chrysler automobile body Is this common knowledge? I only found this on the web last night. What magnificent piece of reference.

Thank you, I will look into it.

I see what you are saying, maybe this one fits straight on the axle. Is the lug bolt pattern 5x5.5? If not I can get another centre hub made up out of a wood wheel hub. What is the depth of the drum? leigh.raarn@yahoo.com

Thank you. Is there the B pillar between the doors and any roof parts, moldings garnish for above the doors etc? Was the roof all timber on the 72s? Thank you.

Hi, did you sell the 72 sheet metal? Thank you

Thank you, but not the same one I am afraid. Looks much bigger than the one I am looking for and used lug bolts, not wheel studs and lug nuts. Thanks agin.

Yes, I think after 1930 all the brakes for each model become standard equipment across the board. So, like the 14-inch wire wheel drums, these are hard to find also. Leigh

Thanks Jay, I have been looking everywhere for a while now. Leigh

Thanks for your opinion. I strongly believe you are thinking of Chrysler model 72-75-77 14inch brake drums. My car is a Chrysler model 66 which has the same 11inch drums as Plymouth PA etc.

Hi, I am looking for 1 rear wire wheel brake drum and hub for 1930-32 Chrysler/Plymouth/Dodge/Desoto. To suit 11inch brakes with 5x5.5 lug nut pattern. I will also accept a front one so I can use the drum. Thank you'

Hi, I am looking for 1 rear wire wheel brake drum and hub for 1930-32 Chrysler/Plymouth/Dodge/Desoto. To suit 11inch brakes with 5x5.5 lug nut pattern. I will also accept a front one so I can use the drum. Thank you'

Hi, I am looking for 1 rear wire wheel brake drum and hub for 1930-32 Chrysler/Plymouth/Dodge/Desoto. To suit 11inch brakes with 5x5.5 lug nut pattern. I will also accept a front one so I can use the drum. Thank you'

Hi, I am looking for 1 rear wire wheel brake drum and hub for 1930-32 Chrysler/Plymouth/Dodge/Desoto. To suit 11inch brakes with 5x5.5 lug nut pattern. I will also accept a front one so I can use the drum. Thank you'

Hi, I am looking for 1 rear wire wheel brake drum and hub for 1930-32 Chrysler/Plymouth/Dodge/Desoto. To suit 11inch brakes with 5x5.5 lug nut pattern. I will also accept a front one so I can use the drum. Thank you'.

Could I see some more pictures of the wheel first please? Not rusted bad inside, buckled, edges dented bad or lug holes damaged? Thank you.