cquisuila

hello i wish to know what reference brake drums for my riviera. I think at diameter ext 12" and int 9.5". ac DELCO 18B381 ? 18B80 ? but i don't find the height... > i think to mesurate the height on mine in my car 1966. > IF you have severals references it is a great pleasure ! Philippe

i changed it with web site pirate jack and the booster model 9" PB9002B FOR $125 ! piratejack.net https://piratejack.net/universal-9-single-diaphragm-booster/ the pedal brake is NOW good and the brake efficient

😉FOR INFORMATION the reference which fit for the up line condenser is : A/C Refrigerant Hose Fitting 14208 OR 14108 - Mark FOUR SEASONS

i add that i have opened the climate system

here my old booster....🥴

ok thank you very much i will verify this case other question : i just changed the mufller of the right and now, it is very difficult to run the engine because the engine tends to stall and i have to activate the start several times so that finally the engine does not stall anymore after😐 .before this changment of muffler, the engine runs easily i add that the muffler is not exactly the same that the left muffler IS IT THE REASON ? - LEFT muffler : AP / EASTERN 6521 MSL dimensions : H 3.25" X W 7.75" X L 23 - RIGHT muffler : walker 17906 dimensions : H 4.25" X W 8.8 X L 18 I think to test by starting the car by disconnecting the exhaust on the right

hello I know the shaft is installed correctly. I've checked the manual work shop, but the position of the valve is not very clear. Please, when cold engine, the position is opened ? well ? Thank you for the answer !

😁thank you for this expression !!

i found a local reparator in France for 50 EUROS i have now my radio perfect efficient !! yes !!

i thought that it would be an easy issue but it is not the case, according to people here the game is not worth the candle

yes it is the more simple job without removing the chrome

yes but it is very difficult to remove the chrome....

my power windows and electric bench are good

i think to leave this part but the seal (silicone type ?) crumbles (see picture) so i have to remove the old seal and replace with a white e light silicone seal

Yes we can't remove it but there is a seal that is damaged all along this chrome part so to redo it properly you have to remove this chrome part or i paint without removing chrome and add a silicon seal after all along this chrome

oil here (see picture) but it is very difficult to insert... AND on the side B (under) it looks like it's glued ! 🙃

Hello So, as not to break this part of chrome door, how to disassemble this part please : I did not see any screws...is it glue holding it? Ii prefer to remove this part to need to paint the car well! - I have of course already removed the metal part of the ROOF RAIL SEAL which is screwed Thank you for your help ! Philippe

well it was the booster i changed it with web site pirate jack and the booster model 9" PB9002B the pedal brake is good and the brake efficient GOOD NEW !

hello i have an a/c hose which is pierced in one place FOR INFORMATION the reference which fit for the up line condenser is : A/C Refrigerant Hose Fitting 14208 OR 14108 - Mark FOUR SEASONS > see post after for photgraphy and total specifications !🙂

i remember a shipping cost of UPS for a very small code key for car that i ordered it was in SOUTH Africa and it was to ship to France it was exorbitant with UPS.... around $100 !!!! thieves !!🥵 i asked the vendor to send this part in a single envelope trusting the post office !! it arrived without problem and it cost nothing just a postage stamp !😁

it is nearly certain that the parts are located in europe because the delivery to France with 4 days is nearly impossible from USA to France...

YES😊

my parts ordered in FUSICKS AUTOMOTIVE come from OLD BUICK PARTS !!

yes i have the pliers and rings i am tackling the job myself made of mazda MX5 (miata for us), audi 80 convertible and disassembled the seat trim on Mercedes clk (for recousing) i will try to show the different steps in pictures i ordered in 2021 the seat upholstery on website https://www.autoobsession.com/seatupholstery1966rivieraseatcover-rear.aspx: autoobsession works with Distinctive Industry so i ordered the bench and they deliivered buckets ! and free they released me the real bench < SO super website : AUTOOBSESSION However, the manufacturing time is still long, around 5 months... I ordered the rear bench on the same website in 08/2023, recieved on 12/2023 and again, by mistake,😁 they delivered others seats (for ford torino) so they have released to me in 02/2024 i just finished the job on 03/2024 so rear and front bench are new now in my riviera 1966 😎

yes 2 sides 2" center for riviera often until 1965 2" 1/8 center after verify before order !!