[Need to identify US 4-door sedan from late 60s / early 70s]

They were a hugely popular car. Seems everybody's grandmother had a Dodge Dart or Plymouth Valiant.

With the optional vinyl top, it probably had an automatic.

 

 

[Transmission]

These trannys were popular among "old school" hot rodders  of the 1950's. 

[What are these 1950's seats; not Crosley ?]

Hi, Greg,

 

Thanks for your input . That would make sense. The Morris Minor was a pretty popular car in this area back in the 1950's.

[Identify clock, what's it for?]

Possibly 1937 Dodge, but I am not sure.

[What are these 1950's seats; not Crosley ?]

Thank you. Jim, for your expert advice.

 

I added a small pic of the clamps that held these down to the floorboard. They held the horizontal bar on the front of them down, so they could be flipped forward.

 

Since the man who installed these seats in the Packard shed his mortal coil years ago, now the question is what vehicle they did come from.

 

Something that had been on thr road a few years back in 1956, or possibly late as 1960, as that was when the Packard was last registered.

 

Possibly an English sports car ??

[What are these 1950's seats; not Crosley ?]

My friend bought a 1937 Packard 115 coupe out of a Maine barn a few years ago. It had been stored there since 1956, and the owner had paid $75.00 for it back then.

The Packard is all original, except that the owner had "upgraded " it by installing  a pair of seats that he said came from a Crosley HotShot.

 

Are these HotShot seats?  And, if so , what year?

 

Pictured is the passenger side one, which is not adjustable. The driver's side is similar, but is adjustable, as well as  being what is called "rumpsprung" in my neck of the woods.

 

[Big nickel - plated brass electric headlight]

Thanks, nickelroadster. I would have never suspected it was from a Marmon. 

[Big nickel - plated brass electric headlight]

This is a Big nickel - plated brass electric headlight that had been recycled 50 years as a porch light, with a 120v 25 watt bulb. 

It is 12 inches wide overall, 7 inches deep, and the lens opening is 7 inches wide. 

 

The lower part of the lens is marked "TWIN BEAM" in large letters, and "MONOGRAM" in smaller letters.

 

The triangle motif at the top suggests it may be Hudson, but this is just a SWAG (Scientific Wild-Ass Guess) of mine.

 

 

 

[What is it...]

That thick cast iron 2 ended wrench at about the 10 o'clock position looks like it came with a piece of farm machinery, ca. 1890 - 1930.

I have a longer one marked "IRON AGE" that came with a potato planter.

[Motorcycle , 1905, on beach in Maine]

Here's a photo of a Motorcycle , with a 1905 Maine MC license plate, on a beach. Probably in southern Maine;  Old Orchard Beach, York Beach, or thereabouts.

I saved this photo off the web a few years ago, probably from eBay.

[Mopar Hardtop rear quarter window]

Thanks for the warning. At a local car show last night, I compared one of them to a 1969 Dart hardtop that was there, and it was a match. 

[Mopar Hardtop rear quarter window]

Thanks, KURTRUK. I suspected it was from an A body, but didn't know that also were for the B's. Clever Mopar badge engineering of 50 years ago.

[Indian Motorcycle 1930 1940's sidecar wheels and fenders ?]

Indian Motorcycle 1930 1940's sidecar wheels and fenders ?

 

While this site is devoted to cars,  not motorcycles, and especially not boats, please read on. 

I spotted an old trailer that looked to be made from motorcycle parts in 2002 while doing a construction job in Lamoine, Maine;  which is just across the bay from Bar Harbor. Eventually I met the owner, who told me that it was a trailer for a tender for a Herreschoff yacht (which were abundant in Bar Harbor before the 1947 fire ).  In response to my offer, he had no interest in selling it, or giving any more information about its origin.

Four days ago, I got a call form an antique dealer to whom I had mentioned it to back then. The man who I talked to in 2002 had sold the property, and the mysterious Herreschoff trailer  had been sent to a nearby junkyard; from whence we rescued it.

Now, since Herreschoff was in Rhode Island, I suspect that the parts for this trailer were sourced from Indian, in Massachusetts. I am not even sure if it was built by Herreschoff, but it looks to be professionally manufactured.

Anyway, the fenders look like they would have been for a sidecar. They are about 6 1/2 inches wide by 34 inches long. The wheels are 18 inches in diameter.
Tires;  One is marked MICHELIN 4.00  S 18
The other is marked IRC in diamond, INOUE  GRAND HIGH SPEED   4.00 H 18 4 P.R.
Springs are 1 1/4 inch wide, and 40 inches from center of the two "eyes".
Distance from center of each spring on axle is 47 inches.
Did Indian even make a trailer style axle, or would this have been made up from 2 sidecar axles?

[Can you identify this headlight?]

A few years ago, I had one with a very similar band holding the lens to the housing. It was Chevrolet, from about 1925 0r 1926.

 

BUT, there are much better experts on this site than me; so see what they say.

[Mopar Hardtop rear quarter window]

Judging from the old style DPCD logo etched on its lower corner,  this looks like a

Mopar Hardtop rear quarter window. In addition to the logo, there is "SAFEGUARD SOLID TEMPERED,

SAFETY GLASS, and AS2 M5 29. The glass has 2 mounting holes on the bottom edge, and is about 26 1/4 inches long

by 16 1/2 inches high. 

 

I'm guessing it might be a late 60's or early 70's Plymouth Valiant or Dodge dart 2 door hardtop. 

 

Is this right, and if so, what years?

[Window regulators ... Possibly Model A Ford ?]

George Sprowl of Searsmont  has been very skillfully  restoring old Fords since the mid 1960's.

If he doesn't do rebabbiting, he would know somebody who does.

[Early brass era runabout]

The boy is wearing what looks like one of those thin plastic fireman's hats the Hartford insurance company used to give out at schools during National Fire Prevention Week back in the late 1950's.

[Window regulators ... Possibly Model A Ford ?]

These two window regulators were in a lot of mostly Model A stuff I bought a few years ago.

(As it is snowing here in Maine, with 2 inches on the ground, I'm cleaning out boxes of old stuff in the garage.). 

[Cadillac 1920 30 40's ?]

From an estate lot of a mechanic who ran a garage from about 1926 until the early 1960's.

He had this marked "CAD".

Is it from a Cadillac, and just what is it ? It is 14 inches long.

[1937 Packard 115C Left hand front fender brace wanted.]

1937 Packard 115C  Left hand front fender brace wanted. 

 

My friend is restoring a 1937 Packard 115C 3 window coupe that had been stored in a Maine barn since 1956. It has the six cylinder engine.

 

The car is nice and straight, but had an accident back in the day, and it needs a decent left hand front fender brace. 

 

This is the piece that attaches to the radiator support, and arches over the front wheel and attaches to the outside edge of the front fender.

 

Anybody out there have one of these?

[39 Chevrolet Parts Wanted]

I have a steering wheel, steering column jacket, the steering gear, and the attached steering shaft. For the floor shift model. I have pictures. I Will sell separate parts

[FoMoCo rear wiew Mirror ca. 1970?]

Thanks for your help! Your knowledge of the Ford numbering system is amazing.

[FoMoCo rear wiew Mirror ca. 1970?]

Can anyone I D this FoMoCo rear wiew Mirror?

 

Looks like the style of the late 1960's or early 1970's ?

 

Has markings of HL FT 21 , C9AJ - 17682, and FoMoCo  in a rectangle

[1937 Packard 115C Left hand front fender brace wanted]

1937 Packard 115C  Left hand front fender brace wanted. 

 

My friend is restoring a 1937 Packard 115C 3 window coupe that had been stored in a Maine barn since 1956. It has the six cylinder engine.

 

The car is nice and straight, but had an accident back in the day, and it needs a decent left hand front fender brace. 

 

This is the piece that attaches to the radiator support, and arches over the front wheel and attaches to the outside edge of the front fender.

 

Anybody out there have one of these?

 

Should I post this in the Packard forum?  If so, please let me know.

[1937 Cadillac , LaSalle Bumper center piece medallion]

Thank you for your response, C Carl. That's a nice looking LaSalle. From what shows in the picture, it looks like a nicely preserved original car.

 

It looks like the bumper center piece is the same for front and rear; and from some other pictures I have viewed, I'd say it is the same as the one used on 1937 Cadillacs. Which makes sense, as 1937 was a recession year; car sales were low, and even GM had so save on costs.

 

Do the hubcaps on  your 1937 LaSalle have this same center medallion on them? The one on the bumper center piece would have to have a curve to fit the curvature of the bumper center piece, but I'd guess that material the medallion is made of would be flexible enough to work. 

 

If you can measure the diameter of the hubcap medallion and see it is the same as that of  the bumper center piece medallion, that would be very helpful.

 

That is, I would then know if a hubcap medallion would fit on the bumper center piece.