[What time frame is this tire from?]

up here in the 60s fisk was a brand sold through a gas station chain(the name escapes me)I used the on several cars good tires I bought them used from local wreckers $5 with lots of tread

[Spotlights On Old Cars]

the spot lights on my vicky are adjustable they will move around to move them out a little because of the offset mount on mirror besides the spotlight body.very good for the blind spots on either side

[67 Chrysler Newport no lights]

should start your own post.after having said that I think it should be on the floor on left side of column near side panel area it is a button type switch. here is a 67 dodge I am sure most if not all chrysler products used the same they can be stuck

On 7/10/2019 at 11:30 AM, Kenny 68 said:

I’m new to this forum - and feel a little dum... anyone know how to TURN ON the high beams on a 68 Newport??

 

[Frame dimensions for a 55 Ford Fairlane]

I am sure if you ask on the ford barn someone with a manual can give them to you.the 54 manual shows them I would think the 55 would also.good luck

[Need help identifying my motor]

On 7/14/2019 at 12:44 PM, Pfeil said:

All real Oldsmobile V-8 engines were Rockets. Not all Oldsmobiles had Rocket engines in them. G.M. lost a huge lawsuit in the middle 70's because Oldsmobile was installing small block Chevy engines in Oldsmobiles and calling them Rocket Olds engines

part of the solution was to list them as corporate engines you would get an olds 307 yet it was listed as 305 even in a buick

[1954 Mainline Tudor w/232 y block running rich]

if it is a 239 it will not have a towering inferno carb.the idle screws will be on base of carb.

[How difficult is it to remove a continental kit?]

you know the old saying about opinions mine included on that one.good possibility that started it off thanks to Edsel.picture I include shows my state of mind😁

[How difficult is it to remove a continental kit?]

to answer your question without getting into a shit show about liking or disliking them it is a two man job.and there should be nothing from returning it to the way it left factory.there were two styles the one you show and the other where the wheel? flipped down that one made it hard to get into trunk.I am bias as I have one on my car.it looks like those that were around after he korean war but before viet nam.some neathandrals still think that buggies(cars) do not look right without a horse in front operated by someone with reins in their hands😁

[Starter/starting issue]

I think bloo is giving you good ideas I have not seen a coated ring before may be the problem usually  copper that could be problem.as to safety switch if you bypass it you can feel assured it is not the problem.to bypass simply undo one side and place it on other side with it now having both wires on one terminal either side will do.remember to change back if it eliminates the clicking.I doubt it is problem but easy to test this way..just make sure when starting you have in neutral or park with parking brake on

[Does anyone know if a '57 Cadillac will fit on a U-Haul trailer?]

I would question the claim of restoring by pro when engine colour is not even close.that being said nice looking car.

[Fixing a front end...I've been doing it wrong all these years]

someone needed misstang front end parts for their hotrod

[Need help identifying]

I am pretty sure it is missing the upper and lower ring portion.

[2 door convertible bench seat]

kiaser is pretty good seat is not a 54 ford  as he said rub rail different.ashtrays may be for sedans but not vickies as they are in rear arm rests 55-56 are same I believe

[Two more Carfax questions please]

I would compare them to BBB no complaints no record key being reports

[Cool? Yes, No? Thoughts on styling.]

in the description it states turns heads no wonder they forgot to mention the heads were turned away.I am sure it turned stomachs also.being as it is from la la land the smog may have affected the assembler

[1954 Camp trailer]

looks like they lost the boat I nave seen them in similar colour but included the boat on top

[Blue inquiry]

Bloo has it right

[Posiable scam?]

it may well be a possible scam but I am not sure about it being a posibial scam having never seen one😃

[Dole in-hose thermostat - replacement found]

those clamps look to be a rare type 😁called inapinch

[1975 Chevy Nova arm rest repair.]

the armrest is what is

On 4/1/2019 at 8:32 AM, gregchrysler said:

take door panel off    use plywood template in back of door panel--   fill armrest with fiberglass around screw holes  and place screws in fiberglass while it cures  then take screws out and use new screws in back of plywood template  good  luck

the armrest is the part that is broken not the door panel if you look close you can see the remaining piece of armrest still on the screw in door panel 2nd from left

[Need help identifying 1920's 4 door sedan]

31 minutes ago, keiser31 said:

I have seen that style with the piano hinge/standard hinge combination. I just cannot remember on what. Must be getting old and feeble.

that is a very rare thing take 2 aspirin get a good nights rest and I am sure it will come to you😉

[New for '62 De Soto Diplomat]

odd looking is an under statement all of the exner era were like that

[1975 Chevy Nova arm rest repair.]

do not laugh but gorilla glue would probably work.a new one if available would probably need to be coloured to match.forgot to add the pieces that are missing plus screws will probably be laying in bottom of door when you remove the panel

[Eastern Nebraska Auto Recyclers (salvage) still in business?]

their name I think would probably help probably quicker to drive there than await a response from people were there back in the day

[1956 Buick power steering column bracket]

you are right my bad not sure where I read FORD looks like someone who can read answered you question