30dodge35
-
Posts
384 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 30dodge35
-
-
-
I had her digitize my car and truck for the front. And the wings for the back, for monogram
-
Tom, get with Kim at the DodgeBrothers store, she may be able to do it for you
-
yes that is the visor
the cylinder is mount for windshield wiper
it is mounted on windshield frame
-
1
-
-
my 30 dA has the hinge
i had to grind off heads
then carfully drill screws
some i had to tap to 12-24 in the plate on car
the hinge on my windshield was spot welded
also i have a rubber seal between hinge and car
got it from steele
it prevent water from getting push up in car when running down road
-
-
had the same problem on 16
rebuilt waterpump same
checked timing same
radiator flushed my shop reinstalled same
checked torque on head
low torque one loose stud
repaired retorqued fixed problem
happy!
-
In need of a serviceable Waterpump housing for a 1916 DB touring
-
R.White you have pictures?
-
Looking great!
-
Glad to see you are getting some hands on time on your car,
looking good
-
the light on ebay is for top
corner lights are 1/2 size with external switch
-
1
-
-
I have been looking for these corner lights for 1930 DA, apparently previous owner didn't reinstall with new interior,
Thanks to Tom Meyers I don't have to look anymore,
He has pulled a rabbit out of a hat again!
http://www.myersearlydodge.com/
-
1
-
-
Nice color , what it called?
-
Yes , my strips sit over edge on roof, that why a layed a bead of silicone between
-
I don't see metal edging attached to bows,
with metal strips screwed on and chicken wire stapled to bows, I used aluminum metal tape over strips,
i let fabric warm to room temperature , stretching over strip, then stapled to wood in underneath, using heat gun in corners helps get a nice round fit.
I applied 5200 black silicon ,windshield adhesive in track to seal and installed , with screws and bolts from inside cab,
dont forget to lineup hole for dome light wiring.
-
you have lacing in between?
-
You may not find breakdown ,. The second series was only built 6 months, It was a truck in transition to the 36,. We find with all model changes during production, especially in early years with Engineers always trying to improve
-
Dennis , I mounted the crossbar to frame with a 1/4 rubber by 2 inch sheet
as a bumper , once fender mounted and shroud put on radiator, it has to be adjusted together to align. ,adjusted engine cowling with rods
-
WTB 1930 DB DA sedan interior rear corner lights and switch
PM me with information
-
Sent you a pm
-
Looking great!
Lots of Chrome
what webbing are you using between cab and frame?
-
Happy Birthday , Jack
-
Permatex gasket sealer,it helps to let it get tacky first then put gasket on , it keeps it in place till to install and tighten bolts
The Ressurection of Daphne - a 1932 DL
in Dodge & Dodge Brothers
Posted · Edited by 30dodge35 (see edit history)
Taylmade, I have a technical builtin, I got from Harry on adjusting Gimmer box, if you PM me your email , I will send you a link