pont35cpe
-
Posts
2,420 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by pont35cpe
-
-
Anyone know if the other 2 meets, spring/fall, will still be at Chickasha?
-
https://www.facebook.com/marketplace/item/752107223710024 Ad is in Frisco, Tx $6500 Car is actually in Troy, Michigan
-
1
-
-
I have a 499757 from a `41 Pontiac 6cyl. Free if you can use it, pay shipping from 75090. It would need to be repaired where seal rides
-
1
-
-
I just replaced the freeze plugs on my `35 Pontiac 8cyl. Maybe your engine uses the same type, 1 1/4" expansion convex disc type. I went ahead and replaced all 4. I bought some old stock brass ones. Bought them on ebay. https://www.ebay.com/itm/325895902739
-
You might be able to get access to it by removing the transmission floorboard cover. I`m not exactly sure if the `37 trans cover includes the toe board, if so it`ll give access, if not the whole toe board will have to be removed.
-
2
-
-
I`m riding with Ben on this one. Front motor mount has been changed, to be installed in a `41-`48 Special. 248cu in. engine
-
1
-
-
Copy and paste. Put the curser on your picture, left click, then right click, window pops up, left click "copy". Then you can go to your letter/posting, curser left click, then right click window pops up, left click on "paste". There should be your picture. This also works on statements, paragraphs, and the https:// line, highlight blue(put curser on, hold and sweep across, to turn blue)then right click copy, and you can transfer. Simple as can be once you learn. You can also look up "How to copy and paste" for directions. Good luck
-
I remember when tires were balanced on the car, in the direction they spin. When removed, and balanced on a machine, are the tires spun in the direction related to where they are mounted on the car? Seems to me they should be.
-
I`d still like to find out about this `35 Pontiac delivery.
-
1949 Plymouth
-
1
-
-
-
Highlight, copy, paste.
-
FYI, the right front door vent window, and the left rear vent window, use the same regulator. Also left front, and right rear, are the same.
-
2
-
-
-
5 minutes ago, NIBOR0313 said:
It has expired.....if anyone can tell me if it's available contact me at ROBINUFF@proton.me I'd really appreciate it.....it looks almost exactly like my grandpop's car and I'd like to buy it
contact info is in the first posting.
-
11 hours ago, 1939_Buick said:
1936 was the first year of all metal roof.
Actually, 1935 Pontiac, Oldsmobile, and Chevy Master Series, was the first all metal roof, called the Turret Top.
-
1
-
1
-
-
Not sure what you have. Check these out. Here is a correct pump, and rebuild kit. For your 50 series. https://www.ebay.com/itm/276356236503 https://www.ebay.com/itm/384355569514
-
40 series has 3 ribs on the side of the hood, yours is at least a 50 series. Check the wheelbase to be sure of the larger series.
-
I`ve always just used a flat blade screw driver, and removed the build up manually. The old grease and dirt buildup, usually comes loose in big chunks, right down to the steel surface, then i use a solvent to clean before painting.
-
1
-
-
On 3/3/2024 at 3:09 PM, Flathead48 said:
I will check against origina
Can you post a picture of the original?
-
I think you answered your own question.. Series may determine what it`s actually for, i don`t think all `39 Oldsmobile`s had the trim on top. Or maybe 6 or 8 cylinder.
-
Check with Terrill Machine, DeLeon, Texas 254 893 2610 8am-5pm week days
-
Didn`t he have something to do with the "5mph bumpers" too?
-
15 hours ago, Kjay said:
That’s it exactly. Text me at (618) 335-6732.
I don`t do cell phones or texting. I`ll try to send you a PM later today.
35/40 series engine freeze plugs
in Buick - Pre War
Posted
My `36 233 has one at the back of the head, and four on the left side of the block.