-
Posts
6,506 -
Joined
-
Last visited
-
Days Won
3
Content Type
Forums
Gallery
Events
Posts posted by countrytravler
-
-
The numbers are on the manifold rear side of block.Found it. (H76-949) Its a hot one here. The first reading is on a truck out side, the 110 is from my radio in the garage.[ATTACH=CONFIG]196977[/ATTACH][ATTACH=CONFIG]196978[/ATTACH][ATTACH=CONFIG]196979[/ATTACH][ATTACH=CONFIG]196980[/ATTACH] -
-
-
Going to check that now. Thanks!Looks like a 2252 series senior 6 or a 1929 DA motor to me Engine # should be on manifold side at the at the top front area of the block They are stamped rather lightly A piece of emery paper may help -
Yes.Does the distributor go through the head? -
Cant find # anywhere. No cyl head. Just dug it out of corner.
-
No rust. 250.00 or OBO.
Can ship anywhere
209-613-1199
Jamestown Ca. 95327 (USA)
-
-
If all fails, C4
-
Boy!! Nice Job:cool: Do you want the parts from the email I sent you?
-
Anybody have good pictures that you can post of the outside door handles and the strikers with measurements?
-
I have a hand full of customers if you want the job!!Hi Dave,Trouble is his wife convinced him to keep them just in case !
I'll keep nagging him. I've removed all my skins so I have to repair each one then put back on the hubcap backing. Looking forward to that job like a hole in the head !
-
I would jump on that. I heard of someone paying 700.00 just to have 1 cap restored.Hi Dave,A guy I know was selling his 5 caps for $800 fully restored. I guess when you add up the time, plating etc comes out even....not sure I haven't tackled mine yet.
Ken,
Where your luggage rack mounts pass through the lower body section, what is used to seal the opening around the mounts ?
Cheers
Ian
-
-
-
-
-
-
What Mopar parts do you NEED?<!-- google_ad_section_end -->
<!-- google_ad_section_start -->Going to a all MOPAR car show and swap meet June 2 2013. Let me know what parts you are looking for. I'll be your eyes at the meet. Give me any info and price for the parts your looking for. I'm going to try this to see how it pans out.<!-- google_ad_section_end --><!-- google_ad_section_start(weight=ignore) -->Thank -
-
What Mopar parts do you NEED?<!-- google_ad_section_end -->
<!-- google_ad_section_start -->Going to a all MOPAR car show and swap meet June 2 2013. Let me know what parts you are looking for. I'll be your eyes at the meet. Give me any info and price for the parts your looking for. I'm going to try this to see how it pans out.<!-- google_ad_section_end --><!-- google_ad_section_start(weight=ignore) -->Thank You, Dave -
-
Man u are loosing it. The one your building to put that cover behind it DA!!!!
-
I'll build u one for the roaster HAHA!:confused:
early 30's 1/2 ton rim and hubcap wanted.
in Dodge Trucks
Posted
Steel Floor