one-shot

What does this front bumper fit? Found a lot of MOPAR at this place and guessing it is somehow related. Surface rust and a small bend close to middle. About 80 and 1/2 inches in length. Four connection points for bumper brackets, really spread out. Thanks

30 Plymouth On E-Bay for sale

The inside of the ends shows where a plate had been welded previously. One end is distorted like it was used for a pry bar or maybe pried off. But the plate has been definitely removed from both ends.

I don't see how it mounted to fenders, must have fitted inside something, or else the rest of bracket was cut off, if it was they did a neat job. Got a feeling it will never find a new home.

Not sure if this is any help. I can find no markings of any kind. This end of bar has correct bend. Someone must have used it as a pry bar at one time. I did find the inserts for both buckets. 10 1/4 outside dia of bucket. No holes in bar except for bolt to bucket on both ends. The whole bar is a stamped and rolled one piece steel, Hollow on the inside. Low budget.

I get some better pics tomorrow. Thanks

What does this headlight bar fit? The one end is bent out of shape a little and I may have the reflectors for them. Was a lot of old Mopar there. Looks like it was made on the cheap. Thanks

For sale a steering box for a 1923 Dodge Brothers. Turns by hand, surface rust and some cancer on end of gear due to contact with earth. See "obit 23 dodge" for serial number of car it came from. 75 dollars and the ride. Thanks

For sale a Stromberg UX-2 Updraft. It is showing signs of Pot Metal deterioration. Seems to be all there and screws do not show signs of ever having been removed. 30.00 dollars and the ride. Can do a box,(Piority) foam, insurance and tracking for under 20 dollars. Pm/E-mail

For sale a pair of headlights for a 1923 Dodge Brothers, includes rings. Only surface rust. No lenses but looking. Bulbs still in sockets, no dents. 100 dollars for pair plus shipping. PM/E-Mail or Phone 540-428-2079 Thanks

[ATTACH=CONFIG]178201[/ATTACH][ATTACH=CONFIG]178200[/ATTACH][ATTACH=CONFIG]178199[/ATTACH][ATTACH=CONFIG]178191[/ATTACH] For sale a pair of headlights for a 1923 Dodge Brothers, includes rings. Only surface rust. No lenses but looking. Bulbs still in sockets, no dents. 100 dollars for pair plus shipping. Thanks

For sale a set of four 1948 dodge hubcaps ("9") for 40 dollars and the ride, (Postage 12-15 dollars) They have been identified as " D-24 1946-48 Dodge pass car" Thanks PM or e-mail

Got a pair, looking for a car to be made whole.

By the faded serial number this is from a 23 Dodge. Steering wheel has lost most of its wood.(Sorry about sharpness) More I think of it it would make a nice wall hanger (Floor board, if that's what it is called). Not sure its a fitting obituary, but better than the inside of an old truck rotting away.

Barring a lottery win, those two lenses are as close as I will come to that beauty.

I believe these to be Chrysler for a 1931/32 "6" Maybe CI. Measure 10 1/4 across the back, Outside to outside The Lenses are C M Hall Lamp Co Detroit MI Depressed Beam Headlamp," are flat". 8 31/32s And 9 39/64s are the embossed numbers on edge and part 10095, also. I see this part number show up once on E-bay, otherwise the trail is cold. have a pair Thanks

Went outside my comfort zone and removed glass. Has a 10 1/8 number for dia. Monocram as mfg. Pat July 3 1923. No chips/cracks. Found a reference that said (1928-29 10 1/4 inches,)

Thank You. Lets see If I can find them a home where they are needed.

I have a total of six, two of the larger size, 10 inch and four of the smaller 9 inch. I purchased some rims for my Plymouths (37s) and they came with. One of the 10 inch one has issues with the skin. I'm thinking two are for 17 rims (year?) and four are for 16 inch (year) as I purchased 16 inch rims. Any help would be appreciated. I.m still on a quest for the right plymouth ones. Thanks. .

I only found one of these and it has surface rust and the outside ring has two stress cracks. I think its Cadillac because of small emblem at top. No chips, holes or dents. Somewhere between 10.5 and 11 inches across. Thanks

I only found one of these and it has surface rust and the outside ring has two stress cracks. I think its Cadillac because of small emblem at top. No chips, holes or dents. Somewhere between 10.5 and 11 inches across. Thanks .

Roger PM please or C 703-231-3031/H 540-428-2079. More than interested. Thanks

I will be back there in two weeks to start, I will take lots of photos (Beats words). Pm me and I will send photos to you.

I'm going to be removing parts from two 39 Plymouths before the crusher gets them in the spring. good doghouse/grill on the one. One is a deluxe with a 3 speed. I only plan to salvage drive train on both and gas tank/straps. PM with wants,

In my youth I did a lot of engine swapping and adapting. All Chevrolet. Trying to cut down "On the get it on the road time". I went ahead and purchased the motor and am awaiting the call to pick up. Going to be my spring project. I appreciate the input and will follow the advice. Thanks