gegrunt

For sale driver's side 1946 1947 1948 NOS Buck Super Roadmaster outer rocker panel $275 plus UPS. The panel will be cleaned to bare metal by Restoration Specialists before shipping. Any questions my number is 262-549-9583.

Up for sale is this NOS passenger side two door rocker panel that will fit all 1950 1951 1952 and 1953 Cadillac cars along with the 1950-1953 Buick Super and Roadmaster cars and the 1950 1951 Oldsmobile 98 model cars. I had this panel cleaned by Restoration Specialists with their akaline electrolytic immersion process they cleaned the panel of all old primer and surface rust. The panel is $275 plus UPS. I can be reached at 262-549-9583 if you have any other questions on this panel

I have a NOS American Motors wheelhouse panel that can't remember his name or age, The AMC GRP # 20.272 Part #3615576

I am selling rocker panels that fit all 1941 1942 1946 1947 and 1948 Chevrolet, Oldsmobile 66 and 68 series along with Pontiac 25 and 27 series. I have these rocker made by an Amish sheet metal worker who uses an original rocker that I have for a template. These panels will fit either side of the car, The shipping price depends on your zip code. The panels are $65 each plus shipping,

If you would ever decide to go with a different steering wheel please let me know, I would be interested in purchasing. I know that they make a repro of the wheel but I have been told it is smaller than the original. I would rather restore an original than use a reproduction anyway.

Thank you for taking the time to help me ID this panel. If you are ever looking for some sheet metal for a car from the late 1940's to early 1960's just let me know, I will try to return the favor.

I know that this panel looks like some type of body mount but I cannot find any listing in the one Ford parts book that I have. The part number written on it is 21 A 16144 and calls out the application as 1942-46 Ford but I can't quite nail it down as far as application. Does this look familiar to anyone?

I am selling this NOS rocker panel that fits all 1951-53 Oldsmobile 88 four door cars along with the 1952-53 98 models. This panel was cleaned by a redi-strip type cleaning and is 100% rust free. The price is $200 plus shipping PH 262.549.9583 e-mail sonoma@execpc.com

These rocker panels were made by an aftermarket company back in the 1950's, I have both driver and passenger sides available. The panels are $70 each plus shipping. PH 262-549-9583 e-mail sonoma@execpc.com

That looks like an original "butterfly" steering wheel on that car. Whatever you don't give that piece away.

I have a NOS Buick front brake drum for sale that fits 1964-72 Skylarks and Specials along with 1964-66 station wagons and Gran Sports. The casting number is 1359632, the price is $60 plus shipping. PH 262-549-9583 e-mail sonoma@execpc.com

This is a inner fender that I acquired last summer with a lot of Pontiac parts, I know that it is now post 1949 as those inner fenders seem much lager than what this is. Cars from the 1930's from what I can see did not have inner front fenders as the sides of the hood were in this area. That would narrow it down to a car 1941-48, does it look familiar to anyone?

Dave, thanks for taking the time to confirm this for me, Gary

I have this staineless steel gravel guard that I am sure fits on the rear door of a four door Pontiac, does anybody know what years it would fit?

I am selling an original oil bath air cleaner that fits all 1941-48 Chevrolet cars. It is used in very nice condition, price is $65 plus shipping. Call Gary at 1-262-549-9583, e-mail sonoma@execpc.com

I am selling panels designed to replace the lower front section of the rear quarter on all 1954-56 Buick Special and Century two door cars along with the 1954 Skylarks. These panels are made by a sheet metal craftsman who makes them with an English wheel using a NOS quarter panel for a template. The panels are made from 18 gauge sheet metal and are priced at $210 each plus shipping.

Thank you for taking the time to answer me on this question. I am going to have to start paging through some of old Motors body books that showed the detailed pictures of the front of the car including the bumper and the grille assembly

I am trying to verify that this set of bumpers I have for sale are for a 1953-54 Pontiac as they were identified. Can someone please take a look and let me know if that is correct?

Does anyone reconize this four door rocker panel? I think it fits Hudson cars from either the late 1940's or early 1950's but I am not sure which years would be correct.

The attached pics show what I assume is an inner fender well, more than likely from a General Motors car. Does this look familiar to anybody?

I have this NOS Buick rocker panel extension that I am trying to identify, I know that it's two door and I know it fits 1946-48 for sure which means that it also probably fits 1941-42. Can anybody tell me by the dimensions on this panel what models it fits?

Thank you for taking the time to answer Rick, this information will be helpful

Does anybody know if the body mounts for the 1960 Ford cars are interchangeable with any other year Ford cars? Nobody reproduces them that I am aware of, if someone could even tell me what the OD of the rubber bushing is and want size the metal sleeve would have to be for the body mounting bolts it would give me something to go by.

New Fram F-415 by-pass oil filter housing with directions, it is listed as fitting all 1935-40 Plymouths except 1935-69 Standard models along with all 1935-40 Dodge cars, 1937-40 Chrysler Six's and DeSotos. The second page of directions lists it as fitting all 1941-42 Plymouth, Dodge, Desoto and Chrysler cars. I believe that this would fit the 1946-48 Mopars also as they used the same engines as the 1941-42 cars. This filter housing is $65 plus UPS.

I have the NOS 1941 Chevy hood ornament pictured for sale for $130, shipping included for all domestic addresses. I can also ship to overseas countries but the cost would depend on where you live.