ROD W
-
Posts
784 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by ROD W
-
-
That is a 1926, 115 of these were built for export, model 26-49X Enclosed tourer where the hood did not fold. The model number is on a plate on the fire wall
Rod
-
hopefully it didn,t do any damage whenbeing removed
-
dibarlaw
The 25 ,26, and 27 standard radiator shells are all the sat the same size, the only difference is the 25 shell is flater, the 26 is more rounded at the front. But they are inter changable.
Rod
-
Leif
What was this Buick used for. It must have had a short torque tube. :confused:
-
If it was built in September 1925, it will be an early 1926 model. As Unimogjohn said the data plate on the firewall will give the year and model number. If the model number is 26-27, it was a 1926 year and model 27 is a two door coach. Seventy years of Buick by George Dammann has pictures of all Buicks, numbers produced, model numbers, etc . A simple way to tell the difference between a 25 and 26 is, a 25 has a combined starter/ generator at the back of the motor, where as the 26 has separate starter and generator
Rod
-
The Master Six Brougham Sedan was model 26-51, The model number should be on a plate on the firewall. These came on the 128" wheelbase, being the top of the Buick range, they had the plated headlights and side lights and a built in trunk rack. 10,873 were built.
The master six had the 6 nuts on the rear wheels where as the standard six had 12. Parts are not interchangable between the master and the standard models
Rod
-
I think 24 to 27 are the same, just the brake linkages are different and different length
torque tube between the models. As Drivea55 says, it would be easier to repair the crack rather than changing over the whole rear axle
-
Ben
I got mine from Antique Tyre Supplies.
B.F. Goodrich 6.00x 22 $417 +GST
tube $54
Rust band $36
I think he sold another brand which was a little bit cheaper
Rod
-
Ben
I had a 25-25 thirty years ago and I couldn,t get 5.00x 22 tyres then, so I changed the wheels over to 21"and used 5.25x21"tyres. But a year ago I baught a 25-55x which normally has 6.00x22"
but it has 5.00x22"Olympic,s on the front which I have to change over to the 6.00x22. These 5.00x22 have never been used, but he baught the car with them on more than 30 years ago and it sat in his garage never touched for that time. So where the prvious owner got these tyres from I don,t know.Its amazing your car still has the 5.00x22.
Rod
-
Leif
In Seventy Years of Buick, there is no sport Touring in either the 25-45 or the 26-45 which
both have the 120" WB. Where as the above car is a sport touring on a 120" WB. What we
don,t know is wether the 25-25-S. had a standard six motor or the master motor. You would
think if it had the standard body it would have the standard six motor as the standard bodies had a smaller (lower) radiator.
Rod
-
Leif
A Buick club Member in Western Australia has this 26-45X Master on the 120"chassis. As you can see it has the built in trunk rack and the shorter body. he said it has the Fisher body not an Australian body.
Rod
-
Lex
That page came from " Seventy Years of Buick" by George Hamman. In 1924 Buick only came out with 4 and 6 cylinder engines, The standard 6 motor came out in 1925 when the 4 was dropped. My figures show the 6 cylinder engine numbers for 1924 ranged from 1087630 - 1273001. Your car defenitly looks like model 47 and it says the model 47 was the most expensive model on the 120"wheel base. From your photo,s it looks like your car has the glass divider between driver and passenger which would be the top of the line model on the 120" wheel base. My guess is that being a Canadian Buick and an export there was a difference between the model numbering.
-
calntvs
The axles are different between 25 and 27 standard, Th 25 is square where it goes into the planetary gears and the 27 has splines as can be seen from the attachment from Leif. The splined axle and gears are better because there are no weak spots. the square gears break at the corners. You can change the axles to 27,s but you need to change the planetary gears also. Also the splined axle is thicker {and stronger} and there is a ring inside the axle housing which needs to be ground out a bit to get the axle in. I sent mine to a machine shop to have it done.The brake mechanism is different between the 27 and 25 so you can,t really change the whole axle.
Rod
-
Leif
I was looking through " 70 years of Buick" . but could not find model 39. 23-34 was th 4 cylinder roadster, 23-44 the 118" wheel base roadster and 23-54 the 124" weelbase roadster. In the 4 cylinder line they went from 34 through to 38. Did they have variations of these exported to Europe or maybe Mclauchlan Buick
PS. I have just read further and found an entry, "Later in the year the Model 23-39 Sport Roadster was introduced" production run 1,971 compared to 5,768 for the Model 34. I wonder what the differance was.
Rod
-
Volucer
Look in multiple craigslist, good restoration projects regularly come up. It can be accessed
through Buick Buy/Sell top entry
-
He is advertising in the latest Buick News about getting another batch made. Cost
approx $750 AUS plus shipping. Email : ranald14 @bigpond.com
-
JB
the body is a full restoration, but there is a E-46 body in Inglis Florida. No coupe,s were imported into Australia, so it would make a very interesting
restoration. From the photo,s it looks like there is bad pitting rust in the rear
section of the body around the trunk lid. Is there anybody in the Inglis area that could have a look at this coupe body. The bottom of the cowl and under the doors is rusted out but these are easy to replace.
Rod
-
Thanks everybody. It looks like these are smaller wheels than were normally on 1918 tourer 118" wheelbase. Maybe at some time the wheels were changed over because they could not get the correct tyres.
-
Am interested in a 1918 Buick tourer that has 5.00 x 23" tyres. Seventy Years of Buick says the 118" wheelbase cars have 34 x 4" tyres. Are these the right size wheels for the car.
Rod
-
I have the same problem on both my 1920 and 25. I turn the vacuum tank off to stop the car, that way I don,t forget to close it and come back later with fuel everywhere which as silerghost said, a real fire hazard. I,ve tried adjusting the float, reseating the needle etc, etc, I think the needle and seat only have to be a tiny bit off centre and they leak. My carby was rebuilt, and still the problem. there is side play in the pin that holds the float and needle, maybe a shim to stop that side play would work, as long as it doesn,t prevent free movement.
-
If the vacuum tank is full, the motor should run for about ten minutes. If your only getting a couple of minutes running, its only running on fuel in the carburetor bowl. when I turn off the vacuum tank mine runs for a minute or so. Sounds like
fuel isn,t draining properly from vacuum tank
-
Peter
Most people use the original wood as patterns for making their new wooden frame.
Most of what was said in the thread, 1926 floor plan is the same for the 1919. The 1918,1919
and 1920 six cylinder roadsters were all on the 118" Wheel base chassis so I think the bodies were the same. 1921 had a different body shape.
Rod
-
Chris
The seven passenger had a 124' wheel base. Th 5 passenger had a 118' wheel base.
Also the front seat on the 7 passenger was straight. Yours looks like a 5 seater
Model E-45 Touring, if there are no small folding done seats in the rear.
Rod
-
Peter. Start your own Thread, you will get more reply,s. Go into Buick- Pre War and click onto New Thread
1916 Headlamp glass?
in Buick - Pre War
Posted
Roger,
photoes of my 1920 headlights. Says Pat 1920 so 1916 must be different