alini Posted October 5, 2015 Share Posted October 5, 2015 I did the drivers seat the other day. The adjustment track was bolted right to the seat frame. I just put the passenger seat on the table to work and see that it has rubber pads between the tracks and frame. Is this correct, or am I missing/or have rubber pads somewhere? Link to comment Share on other sites More sharing options...
RivNut Posted October 5, 2015 Share Posted October 5, 2015 Mine aren't rubber, they're more of a nylon. No metal against metal and the nylon lets the tracks 'glide.' Link to comment Share on other sites More sharing options...
alini Posted October 5, 2015 Author Share Posted October 5, 2015 Not the four spacers inside the slider. I mean between the track and frame, where it bolts together. The drivers seat didn't have these and the book calls out a 3/8" spacer bit it doesn't really break down driver or passenger Link to comment Share on other sites More sharing options...
slosteve Posted October 5, 2015 Share Posted October 5, 2015 Mine is the same way Chris. However, my drivers is power; don't know if that makes a diff. Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now