Riviera63 Posted April 22, 2015 Share Posted April 22, 2015 I recently removed the front bumpers from my Riviera to put on rechromed ones. I had purchased new grommets and insulators from CARS Inc. BG635 (OPGI # BR00889) and BI635. After taking off my bumpers I found differences between what was taken off my car, the new replacements and what is pictured in my chassis manual. The insulator I removed from my car between the bumper and the outer fender was U shaped like what is pictured for the 1965. The BI635 replacement was U shaped also but, twice as thick as the one removed from my car. The insulator pictured in my chassis manual is completely round. The insulator removed from the inner fender which holds the steel sleeve for the fender bolt was round as pictured as in the chassis manual. What I had thought was its replacement is a grommet twice as thick as what was taken off of the car. The metal bolt sleeve does fit this grommet. This grommet looks as if it would fit the hole in the fender that the bolt goes through or it could work as the replacement for the grommet in the lower front fender where the bottom bumper guard bolt goes through. Any clarification of what is correct and what goes where would be greatly appreciated. Thanks! Link to comment Share on other sites More sharing options...
RivNut Posted April 22, 2015 Share Posted April 22, 2015 I recently ordered the same parts but I'm not ready to assemble anything yet. I'm interested in what should be as well.Ed Link to comment Share on other sites More sharing options...
Riviera63 Posted April 22, 2015 Author Share Posted April 22, 2015 Ed,I have other feelers out as well and will let you know what I find out. Bill Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now