John_Mc Posted February 18, 2015 Share Posted February 18, 2015 Fellows, the last thing I want ot throughly inspect and repair is the cable brake system on my '37 Zephyr. I will not consider changing to hydraulics. which are obviously a better system. Outside of the obvious fraying etc., does this system have any known failures?? What do I look for and where? Is there a manual that clearly goes through the brakes step-by-step?Thanks for all responses, got to get this old girl ready for summer! Link to comment Share on other sites More sharing options...
19tom40 Posted February 18, 2015 Share Posted February 18, 2015 (edited) John,The owner's manual for the Ford had the brake adjustment procedure in it, maybe the Zephyr manual also has the instructions. The Ford Service Bulletins covers a step by step procedure to inspect and adjust the brakes. A book covering 1932 - 1937 Service Bulletins is available in reprint from Macs, or I can copy the pages that I have pertaining to the Zephyr brakes for you. I think that most of them are in my copy of the Service Bulletins.http://www.macsautoparts.com/ford_mercury_early/books-manuals-and-dvd.htmlMechanical brakes need lubrication at the pivot points and for the cables. You may find wear in the pivots in your system. If so, it should be repaired to give you good brakes.I also have the reproduction hub puller for the rear drums, if you would like to borrow it. It is the only safe way to remove the drums on a Ford product. Any puller that does not hook into the groove on the rear drum, can damage or break the drum. Edited February 18, 2015 by 19tom40 (see edit history) Link to comment Share on other sites More sharing options...
John_Mc Posted February 18, 2015 Author Share Posted February 18, 2015 Great info Tom, I think I have that manual from when I was working on my '39 half-ton.Should I need that puller I'll come and holler. Thanks for the kind offer! Link to comment Share on other sites More sharing options...
peecher Posted February 18, 2015 Share Posted February 18, 2015 While similar to the Ford system the Zephyr uses a cable operated Bendix system which features a "servo" action. I think the most important thing about these brakes are "free" cables and the right brake lining. Properly adjusted these brakes will approach hydraulics in stopping power. If you are not sure about how "free" the cables are I would remove them from the car and soak them in something like kerosene working them back and forth in the their conduits. Years ago I did this on a '38 and the brakes were butter smooth. The Way of The Zephyr magazine( Nov.-Dec 2013) gave a very detailed adjustment procedure for the '36 -'38 Zephyr. These brakes require very frequent adjustments at best and getting the car to actually stop in a straight line difficult. Link to comment Share on other sites More sharing options...
John_Mc Posted February 19, 2015 Author Share Posted February 19, 2015 Great information, is that back issue of Way of the Zephyr available for purchase?? Link to comment Share on other sites More sharing options...
ezdusit Posted February 19, 2015 Share Posted February 19, 2015 John,You can go to the Products page of the club's Website at LZOC.org. There you'll find the following:Back Issues of "The Way of the Zephyr" – Current year's issues........................................................$4.50Previous year's issues......................................................$4.00Older Issues, Vol. 7 - up..................................................$2.00Older Issues, Vol. 1 - 6.....................................................$5.00Add $1.50 postage for one magazine First Class to United States. All other countries and multiple issues - check with Bob for postage rates.1 copy of each available magazine (approximately 180 issues) postage paid anywhere in U.S. except Alaska and Hawaii............$300.00The "Bob" mentioned is Bob Barr, PO Box 115, Sheboygan, WI 53082, Phone 920-459-7875.If you haven't done so, this would be a great time to join the LZOC. The instructions are also at LZOC.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now