Stevemo Posted August 16, 2014 Share Posted August 16, 2014 (edited) Hi all, I have put together the first pass on what I will require to get my car back to stock. Please have a look and let me know if you are willing to part with any of these items:[TABLE=width: 445]<colgroup><col></colgroup><tbody>[TR][TD]Front bumper brackets[/TD][/TR][TR][TD]Front bumper to bracket fasteners with caps[/TD][/TR][TR][TD]Gas tank cap[/TD][/TR][TR][TD]Fuel level senderDome light lens[/TD][/TR][TR][TD]Wheel bearing dust caps, front, x2[/TD][/TR][TR][TD]Rear bumper fastener with cap, passenger side[/TD][/TR][TR][TD]Tail light lens, left[/TD][/TR][TR][TD]Tail light, right[/TD][/TR][TR][TD]Differential access plate[/TD][/TR][TR][TD]Battery access plate[/TD][/TR][TR][TD]Spare tire valve stem access cover[/TD][/TR][TR][TD]Grille verticals or entire grille and frame, etc.[/TD][/TR][TR][TD]Rear window surround, interior[/TD][/TR][TR][TD]Door lock levers, interior? not sure how they work. Turns out you lift the door levers up to lock![/TD][/TR][TR][TD]Exterior door handle, x1[/TD][/TR][TR][TD]Rear running board supports, x2[/TD][/TR][TR][TD]Wheel lug, x1[/TD][/TR]</tbody>[/TABLE]I can post photos of what I have and need additional of or where the missing part goes to match things up.Thanks! Steve Edited August 22, 2014 by Stevemo (see edit history) Link to comment Share on other sites More sharing options...
Stevemo Posted August 21, 2014 Author Share Posted August 21, 2014 Camera died but I got a few photos to start with.Dome light missing lens, want lens...Differential access plate:Battery access plate and missing kick plate that goes across bottom of door opening:Rear window surround (this one has many rusted out areas)One interior window crank required and also wondering about door lock levers (the car has an exterior lock, how do you lock the car from the inside???)Wheel lug, one missing on another axle Link to comment Share on other sites More sharing options...
Stevemo Posted August 21, 2014 Author Share Posted August 21, 2014 Oh yeah, exterior door handle too. I have one where the metal casing is split: Link to comment Share on other sites More sharing options...
Stevemo Posted August 22, 2014 Author Share Posted August 22, 2014 Hopefully I well get a few offers for parts for sale.Here's the bearing dust cap with the lugs also shown:Tail end including wrong bumper bolt, missing lens, and missing right side light assembly. I guess I need a license plate holder as wellFront bumper...I don't think this belongs with the car so I need the full deal including the brackets. You can also see the issues with the front grille.I'm also going to need an interior sun visor, I can only find one with the car.Thanks again, Steve Link to comment Share on other sites More sharing options...
30 Hupp Posted August 23, 2014 Share Posted August 23, 2014 Wish I could help you, Steve...........You're going to have a nice car when you get it done!Good Luck!Dale Link to comment Share on other sites More sharing options...
keiser31 Posted August 23, 2014 Share Posted August 23, 2014 (edited) Chances are, your car has the door lock on the passenger side of the car. That was the norm in that era as folks were getting out of their parked cars on the curbside so as to not get run over by a passing vehicle. The correct way to lock the car from the inside with no exterior lock/key is to push the inside handle in the opposite direction that it takes to open the door. That will usually lock that style handle.The front bumper looks to be from a 1935 or 1936 Ford. Edited August 23, 2014 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
Stevemo Posted December 12, 2014 Author Share Posted December 12, 2014 Hi Kaiser, You were right on all counts! Things are progressing with the Parts Hoarding and the list is down to mostly running gear parts. My main point of focus at this point are the king pins, the front bumper and the license plate holders. The remaining parts can be restored or built by myself if need be...it would just slow me down and drain my pocket book :eek:. It is hard to believe how many NOS parts are floating around in various collections.Cheers, Steve Link to comment Share on other sites More sharing options...
Guest Norway Posted December 13, 2014 Share Posted December 13, 2014 Hi SteveI have on hand a W front bumper. The bad news is my address.I can not help you with any other part for Wsas I am restoring a T and an O. This bumperwas throwed into a container with Hupp Aerodynamic parts that I received from Australia abt 15 years ago.Best regardsOlav Link to comment Share on other sites More sharing options...
Stevemo Posted December 13, 2014 Author Share Posted December 13, 2014 Hi Olav, Thank you for posting this, I am one of two people who need one of these so this is great news. I will send you a private message to see if we can work things out.Regards, Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now