Guest bkazmer Posted April 9, 2007 Share Posted April 9, 2007 I thank in advance my "on-line support group" as things are going back together on the interior, and I'm discovering new areas of my ignorance daily.There are oak strips drilled to accept the bolts into the floor. I assume the seat rails mount above these, or are they a vestige of some size fitting from a previous owner? There are two strips per side - is this to allow a strap or welt in between? Link to comment Share on other sites More sharing options...
41 Su8 Posted April 9, 2007 Share Posted April 9, 2007 I would have to take apart my entire sill an carpeting to fully see what you mean.I cannot see, nor do I remember wood under my seat mechanism. I suspect that they have beenadded by someone over time. Link to comment Share on other sites More sharing options...
Dave Mitchell Posted April 12, 2007 Share Posted April 12, 2007 Those are a correct Packard part - I have NOS ones with part numbers. They were to adjust the seat to fit the driver. Packard was in business to sell cars and keeping the new owner comfortable goes a long way towards that. I think you may even find mention of these in the service bulletins. You may well like it with them in. Dave Link to comment Share on other sites More sharing options...
Guest bkazmer Posted April 12, 2007 Share Posted April 12, 2007 thanks, Dave. There are two per side, a thin one and a thick one, so I guess there are 4 "height settings" for the seat. Was any welting or pad used , or just directly stack and bolt? This should be fun getting my Packard "fitted." Link to comment Share on other sites More sharing options...
Dave Mitchell Posted April 13, 2007 Share Posted April 13, 2007 I think that my 39 6 and 39 super both had a piece of fabric or welting between the wood and the metal. You can manipulate this until you have a nice comfortable position. Isn't it fun to be going back together with them? Link to comment Share on other sites More sharing options...
Guest bkazmer Posted April 13, 2007 Share Posted April 13, 2007 thanks - I thought I saw traces of a welt. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now