BellafortunaNJ Posted August 2, 2006 Share Posted August 2, 2006 My uncle has a 1924 Walter P Chrysler. The vin plate was manufactured by Fedco Systems and there's a signature of WPC across the plate. the numbers are written in long hand and are repeated. they appear to be 0204E. This is a two door sedan and I dug up a Saturday Evening Post Article from 1924 where WPC is pictured with three cars. I believe that my uncle has the sedan pictured. It has the same pin striping, colors, etc. How can I verify the vin number, or otherwise prove that this is a WPC original prototype. I think that the numbers may be Maxwell's vin numbering system. I'm also trying to establish what this vehicle may be worth. I still have to figure out how to send the attachment to this board. Link to comment Share on other sites More sharing options...
mopar380 Posted August 2, 2006 Share Posted August 2, 2006 You may want to check with Chrysler Historical Collection on this one. http://www.chryslerheritage.com/ Link to comment Share on other sites More sharing options...
Guest imported_Bill-W Posted August 5, 2006 Share Posted August 5, 2006 <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">My uncle has a 1924 Walter P Chrysler. The vin plate was manufactured by Fedco Systems and there's a signature of WPC across the plate. the numbers are written in long hand and are repeated. they appear to be 0204E. This is a two door sedan and I dug up a Saturday Evening Post Article from 1924 where WPC is pictured with three cars. I believe that my uncle has the sedan pictured. It has the same pin striping, colors, etc. How can I verify the vin number, or otherwise prove that this is a WPC original prototype. I think that the numbers may be Maxwell's vin numbering system. I'm also trying to establish what this vehicle may be worth. I still have to figure out how to send the attachment to this board. </div></div>1924 Chryslers did not use the FEDCO serial number system - 1926 was the first year. And Chrysler serial numbers were not a continuation of Maxwell or Chalmers numbers - 1924-1925 Chrysler Model B serial numbers started at 1001 and ended at 58000.The number you quote - 0204E - is missing the first letter. The layout should be AA-NNN-A, but when a car was stolen one of the letters was replaced by its numerical equivalent. Thus the car's number was probably ?W-204-E. The FEDCO letters and the numeric equivalents :W-P-C-H-R-Y-S-L-E-D0-1-2-3-4-5-6-7-8-9To determine exactly what you have, what is the engine number? The number is stamped INTO the engine block on the left front side above the water jacket cover or stamped on a machined boss, top of timing chain case. The number will have a letter prefix followed by four or more numbers.BillVancouver, BC Link to comment Share on other sites More sharing options...
Guest DavidCa Posted August 8, 2006 Share Posted August 8, 2006 I own a 1925 Chrysler 4 cylinder 4 dr. open touring car that was made in Canada. The VIN number is BW102C. Link to comment Share on other sites More sharing options...
mrpushbutton Posted August 8, 2006 Share Posted August 8, 2006 If it is, in fact a 1924 prototype, it will have two-wheel rear mechanical brakes. The production cars had four wheel hydraulic brakes. There are other subtle differences, thats an easy one to spot. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now