last chance for TC parts before it goes to crusher. MPLS, MN

[Todd Nelson]

Last chance before TC goes to the crusher. Will be gone in under 10 days. Only selling these parts left on car at this time. I will be listing additional parts already removed in near future. Car is 89 TC 16v Burgundy w/ burgundy interior. Located near MPLS, MN 55431. Call for more info Todd (952) 881-5395 or email me Omnishelby@yahoo.com

Shipping will be done for actual cost on items not listed for pickup only.

$50 each! L+R front fenders w/o wheelwell trim. $60 with trim.

$50 Hood. Straight with no hail damage. Paint good. Has slight seam swell (rust) under headlight areas. Definitely repairable. Pick up only

$50 hard boot cover. $60 for all three pieces.

$50 Hardtop. Burgundy with burgundy interior. Needs paint. Pick up only.

$50 Rear aluminum bumper reinforcement (beneath fascia).

$15 each F+R L+R bumper frame rail brackets. I can sandblast for $5 each additional.

$10 each L+R metal headlight brackets. Sandblasting available.

$50 complete trunk carpet in good condition. Remember burgundy color.

$50 Anti lock brake module. Worked fine.

[AQX]

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">... TC goes to the crusher ...</div></div>

<img src="http://forums.aaca.org/images/graemlins/frown.gif" alt="" />

[Todd Nelson]

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">... TC goes to the crusher ...</div></div>

<img src="http://forums.aaca.org/images/graemlins/frown.gif" alt="" /> </div></div>

I agree... but rust took a toll on this one. No saving this one. What is even worse is it was a 16v TC.

Todd

[Richard Smith]

Hello:

I have interest in 2 small items

1) Gas lid opener plastic part (on the lever by the drivers seat) mine broke.

2) Fuse box cover lid (removable black plastic cover for fuses mounted under the hood)

This part is located on the left side (as you face the motor from the front end) and near the front left corner.

I have the lower part (hold fuses and all, just the top, snap on cover is missing) (apx) 3.5 inches long X 2.25 inches wide

Rich Smith Cedar Rapids Iowa 319-377-3800 rsmith@prioritymanagement.com

[Todd Nelson]

Rich,

Sorry but I can't help you with either.

Todd

[mirko]

do you have a complete eletric harness for a 91 tc 3.0 v 6?

if so please call me @ 602-487-0027

mirko

[Todd Nelson]

Sorry my engine harness is for a 16V car.

Todd