Guest my3buicks Posted July 28, 2002 Share Posted July 28, 2002 The power seat on my 69 is not working. When I activate the buttons I can hear clicking, but no action. I am sure this is a problem many have came in contact with, so I thought I would ask for your input. Thanks Link to comment Share on other sites More sharing options...
rocketraider Posted July 28, 2002 Share Posted July 28, 2002 If the solenoids are clicking that means that they and the transmission are good. No motor action usually means motor has shat itself. There should be a circuit breaker somwhere near the fuse block. Check that, it may have given up.<P>Good news is, all GM seat motors will interchange with the same type seat from about 1962 on into the 80s. 6-way seem to be the most common. If you have a 4-way or 2-way you may have to dig for a motor. Plugs are different sometimes, but that is a minor problem.<P>You haven't run the seat full travel in any direction, have you? I've seen some of the old 4-way buckets get jammed up if they were run full forward. Then you had to take the drive cable loose and use a drill motor to move the seat backwards far enough so the seat motor/transmission could work it again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now