jmg Posted February 23, 2005 Share Posted February 23, 2005 Hello, I hope someone can help me on this. I have a '61 LeSabre with a 364/2 bbl. I found a 4 bbl intake manifold off a '62 Electra with a 401. Will the '62 401 manifold fit on the '61 364? Thanks in advance for any help. Link to comment Share on other sites More sharing options...
DugsSin Posted March 3, 2005 Share Posted March 3, 2005 The 364 manifolds have a smaller center to center hole spacing across the width of the manifold. The 401's and 425's would be the same but about 1/4" wider than the 364. You can round out the holes but you will still have mismatched ports. The 364-4 manifolds can get pricey from certain sellers ($100.00+) so shop around for the bargain. Best of Luck! Link to comment Share on other sites More sharing options...
Pontiac59 Posted March 11, 2005 Share Posted March 11, 2005 I have two of the 364 4bbl intakes available, one on eBay, one on the side. Supposedly they're pretty tough to find, I went out and got two and the only reason I didn't get a third is the bolt heads had rusted enough my socket just spun on them.Supposedly they'll bring up to $200, but I have my doubts given how easy I found these. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now