1992ToronadoGuy Posted September 15, 2004 Share Posted September 15, 2004 Can anyone tell me how to program additional remotes for a 91 Toronado? It should be the same as for Reattas. The one remote I have now is dying, and it isn't the battery, so I'm gonna try a new remote before I think about doing something drastic with the module. Thanks. Link to comment Share on other sites More sharing options...
DTakas Posted September 15, 2004 Share Posted September 15, 2004 (edited) ----- Edited January 2, 2019 by DTakas (see edit history) Link to comment Share on other sites More sharing options...
Jim Posted September 15, 2004 Share Posted September 15, 2004 Before starting this procedure, BOTH transmitters must be present. Failureto use both transmitters will render the missing transmitter inoperative.If the customer uses only one transmitter on the vehicle, use thistransmitter as transmitter 1 and 2.The entire reprogramming sequence must be completed within 30 seconds ofgrounding the connector. If the procedure is not completed, remove theground at the connector and restart the procedure from step 11. Ignition "ON"2. Ground green single wire connector ( located near the ABS module in thetrunk.3. Wait for the door locks to lock and unlock ( should take 2 seconds)4. Press the "unlock" button on the first transmitter twice ( pauses forone second between presses)5. Wait for door locks to lock and unlock ( should take 2 seconds)6. Press the "unlock" button on the second transmitter twice ( pause forone second between presses)7. Wait for door locks to lock and unlock ( should take 2 seconds)8. Remove ground from green conector. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now