Programming Keyless Entry Remotes

[1992ToronadoGuy]

Can anyone tell me how to program additional remotes for a 91 Toronado? It should be the same as for Reattas. The one remote I have now is dying, and it isn't the battery, so I'm gonna try a new remote before I think about doing something drastic with the module.

Thanks.

[DTakas]

-----

Edited January 2, 2019 by DTakas (see edit history)

[Jim]

Before starting this procedure, BOTH transmitters must be present. Failure

to use both transmitters will render the missing transmitter inoperative.

If the customer uses only one transmitter on the vehicle, use this

transmitter as transmitter 1 and 2.

The entire reprogramming sequence must be completed within 30 seconds of

grounding the connector. If the procedure is not completed, remove the

ground at the connector and restart the procedure from step 1

1. Ignition "ON"

2. Ground green single wire connector ( located near the ABS module in the

trunk.

3. Wait for the door locks to lock and unlock ( should take 2 seconds)

4. Press the "unlock" button on the first transmitter twice ( pauses for

one second between presses)

5. Wait for door locks to lock and unlock ( should take 2 seconds)

6. Press the "unlock" button on the second transmitter twice ( pause for

one second between presses)

7. Wait for door locks to lock and unlock ( should take 2 seconds)

8. Remove ground from green conector.