thumper tattoo Posted September 26, 2003 Share Posted September 26, 2003 i have seen a few posts but do not understand how to ground the slots on the connector underneath the steering wheel any body help? also is there a way to run diagnostics with the CRT? Link to comment Share on other sites More sharing options...
padgett Posted September 26, 2003 Share Posted September 26, 2003 On an 88 go to the "climate" screen on the CRT and press "OFF" and "WARM" at the same time. Link to comment Share on other sites More sharing options...
thumper tattoo Posted September 26, 2003 Author Share Posted September 26, 2003 warm as in the heat button or the up arrow? Link to comment Share on other sites More sharing options...
FlyByNite Posted September 26, 2003 Share Posted September 26, 2003 Look HERE for more answers than you have questions. Link to comment Share on other sites More sharing options...
thumper tattoo Posted September 26, 2003 Author Share Posted September 26, 2003 the website explains diagnostics for a 90 not a 88 and i tried the off heat buttons the crt does nothing but remain as it isi have read somewhere there is another way to do it by grounding a connector it talks about it on the site you gave me how do i ground that thing and is it the one under the dash? Link to comment Share on other sites More sharing options...
FlyByNite Posted September 26, 2003 Share Posted September 26, 2003 Okay, for the 88 ALDL ( Assembly Line Diagnostic Link, that's the one where you jump some pins in the connector ) look HERE. Link to comment Share on other sites More sharing options...
thumper tattoo Posted September 26, 2003 Author Share Posted September 26, 2003 ok at the bottom it says the connector is located in the passanger compartmentwhere is it and also [color:"red"] how do i ground the points to get it to go into diagnostic mode? Link to comment Share on other sites More sharing options...
thumper tattoo Posted September 27, 2003 Author Share Posted September 27, 2003 ok got it to go into diagnostic mode than the screen went blank stupid crt lolanyways is there a link that explains what to do once i have it in the diagnostic mode i went to the site that i got the link for but all of that stuff made no sense <img src="http://www.aaca.org/ubbthreads/images/graemlins/frown.gif" alt="" /> i am not diagnostic savy help me please :*( Link to comment Share on other sites More sharing options...
Blu Posted September 27, 2003 Share Posted September 27, 2003 To get the "CRT" into diagnostic mode you press the climate hardkey on the upper left of the screen. then press and hold both the WARMER (up arrow) and OFF softkeys on the touch screen. Anfter holding them for about 4 or 5 seconds the system will go into diagnostic mode. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now