RE4tuna Posted September 19, 2003 Share Posted September 19, 2003 Can anyone tell me how to get the torque converter out of a 63 Electra? I have the motor out, and the flex plate off. According to the manual it should slide right out. It won't! It moves back and forth an inch or two, but won't move any further. Is there a keeper or something I don't know about? I want to replace the TC seal while I have the motor out.Thanks, Randy FortunaKansas City Link to comment Share on other sites More sharing options...
BamaWildcat Posted September 22, 2003 Share Posted September 22, 2003 Should just pull right off. Might need a little rocking back and forth or a decent bang. Link to comment Share on other sites More sharing options...
Mrbuick714 Posted September 23, 2003 Share Posted September 23, 2003 Try taking the convertor cover off, then remove the bolt that goes into the input shaft. Link to comment Share on other sites More sharing options...
Pat Baysinger Posted September 26, 2003 Share Posted September 26, 2003 I was reading this post and wanted to mark it as one of my favorite posts, then I noticed something at the bottom that said "1 star", so I clicked on it to know what it was. That's when I realized it was for rating this post. My error, sorry about that. Pat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now