jpistorius Posted June 13 Share Posted June 13 Continental 6T engine in a 1922 case... we need one piston. Pictures attached... These measurements are done with a tape measure - so close, but not 100%. If we can find something close, we can verify the fine details. 4-1/2" tall, 3=3/4" diameter, 1-1/8" hole with 2-1/16 above hole to top and 1-5/16 below hole to bottom. Any leads or options will be greatly appreciated! 1 Link to comment Share on other sites More sharing options...
keiser31 Posted June 13 Share Posted June 13 You might try Egge Machine. https://egge.com/ 1 Link to comment Share on other sites More sharing options...
Mark Gregush Posted June 14 Share Posted June 14 If that is the piston you are going to replace, you might consider cleaning up the scoring and re use it. While maybe true back in the day people might just replace one piston, not really a good idea. You could end up with one piston that weights signifyingly different than the rest that can affect the rotation balance. I was thinking Egge also but don't know if they would make just one piston and they may suggest replacing all as a matched set, but you could call them and ask. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now