TattooDan Posted June 11, 2003 Share Posted June 11, 2003 1990 Reatta: Having a little trouble. I want to remove both front marker light assemblies. Can't seem to figure out how. Any help will be greatly appreciated. [color:"red"] <img src="http://www.aaca.org/ubbthreads/images/graemlins/confused.gif" alt="" /> Link to comment Share on other sites More sharing options...
Shelby Posted June 11, 2003 Share Posted June 11, 2003 You get to them from the bottom. There are 5 screws. It is a kindof a [censored] to get at a couple of them. When you get all the screws out it slides out the front easily. IF IT IS not COMING OUT EASILY YOU MISSED A SCREW. Replace ALL the bulbs and clean it up while you have it out. Link to comment Share on other sites More sharing options...
TattooDan Posted June 11, 2003 Author Share Posted June 11, 2003 Thanks for the advice. When I leave work I'll give it look. I'll let you know how I made out. Thanks <img src="http://www.aaca.org/ubbthreads/images/graemlins/grin.gif" alt="" /> [color:"blue"] Link to comment Share on other sites More sharing options...
BigBr00 Posted June 11, 2003 Share Posted June 11, 2003 I also want to remove these light assemblies, but I can't find the 5 screws you've mentioned. I see 2 hexagonal screw-heads on each one, but can't find the others. Could you offer any more help? Link to comment Share on other sites More sharing options...
Rattaboy Posted June 11, 2003 Share Posted June 11, 2003 Do a search on "park light". Link to comment Share on other sites More sharing options...
Guest imported_barra Posted June 11, 2003 Share Posted June 11, 2003 I just had the left side parking lights replaced on my '89. The mechanic removed two screws and it came out enough to get to the side marker and turn signal lights. It was still attached somewhere but he could get at the lights. Link to comment Share on other sites More sharing options...
FlyByNite Posted June 12, 2003 Share Posted June 12, 2003 The attached file may help a little. Link to comment Share on other sites More sharing options...
Guest DTerry Posted June 12, 2003 Share Posted June 12, 2003 I assume you want to do more than just change a bulb, but it's not necessary to remove the assembly to change them. Raise the hood, open the headlights, and remove the headlight bulb. Four screws and uplug it - nothing to it. Then you can reach the bulb holders, and with a little manual dexterity (well, okay, maybe a lot) you can disconnect the holders. Some you still have to reach from underneath. Just did it after the post about cornering lights. I didn't even know I had cornering lights. I immediately ran out to the garage to check 'em out (cool!) and discovered I had 3 bulbs out on the right side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now