kgreen Posted June 6, 2023 Share Posted June 6, 2023 I'm in need to help identifying how the crimped sheath for the emergency brake cable is secured in the bracket attached to the torque tube. The photo below shows the bracket on the torque tube and the part of the cable that threads through the bracket. What secures the crimped end of the cable sheath in that bracket? Link to comment Share on other sites More sharing options...
Drakeule Posted June 9, 2023 Share Posted June 9, 2023 It should be a "open ended lock washer" (not sure what the official name is) that snaps in that groove. I think it should have a spring that goes around that barrel. Hard to get to, as I remember (and that was with a lift!) DRY FIT everything before you assemble; I recall that the parking brake cable that I got from Bob's was a skosh bigger in diameter, made in " you know where." I think I dumped my photos of the assembly that I put on my '40 Super sedan. If I get a chance tomorrow, I'll take a pic and attach. VR, C Drake 1 Link to comment Share on other sites More sharing options...
Drakeule Posted June 9, 2023 Share Posted June 9, 2023 40 Super sedan parking brake cable R side of picture is the rear. Hope this helps. C Drake 2 1 Link to comment Share on other sites More sharing options...
kgreen Posted June 13, 2023 Author Share Posted June 13, 2023 Wow, great shot and thank you very much. It is not at all like I was guessing it could be. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now