vincef1962 Posted January 31, 2023 Share Posted January 31, 2023 Hi everyone, we are making progress on the Oakland. We replaced the old and tired running boards with new wood and rubber. The outside aluminum strips were cleaned and polished just enough to keep it that old look. Underneath the aluminum, the metal strips needed to be replaced so we installed new pieces and painted them with rust armor. The wood was painted with exterior flat black with a splash of Thompson water seal mixed in together. If you use too much of the water seal, the paint takes days or a week for it to dry. Removed the seat and the tool storage compartment and found some surface rust. Sand the area really well and cleaned it up and applied metal prep. After that applied rust armor. Stay turned for more fun! Vince @metal_edge_creations 2 Link to comment Share on other sites More sharing options...
kings32 Posted February 5, 2023 Share Posted February 5, 2023 I have a 1930 oakland 4 dr I am going to sell . Have lots of spare parts ,carbs engine parts spare trans . I made alot of parts for mine . Have complete wire wheel set up including backing plates and spinldes ..don,t want to scrape kings32 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now