kings32

Members
  • Content Count

    392
  • Joined

  • Last visited

Everything posted by kings32

  1. I have a extra one it has not been checked , but can be done . PM me Kings32
  2. I have been blasting for years many whole cars large parts . Never have seen warping . I use a large compressor { compressor size has nothing to do with warping its the pressure } I use about 110 LBs With alarge Maco Blaster . Have done panls on a 1916 Overland , 1972 MGB this summer . I It is dirty job , I use a pressure fed helmet off a second compressor . Kings32
  3. Roger I se you have a 17 Overland . I am doing a 1916 model 75 Would like to get with you at Philly Kings32
  4. Get a time and place , I will be there Kings32 . It was nice to talk to some of you ,like to meet others .
  5. I have the parts, Sent you a PM . Can get them off and ship . Kings32
  6. I measured the 30 Oakland ,19 1/2 4'' mounting holes . Want a picture ? Kings32
  7. You need the top and bottom parts ? Need to dig it out of the snow . Should be able to put it in post office box I think they are about 15 . $ 15 for the part . Kings 32 . do you need any other parts ,going to scrap the car this summer . shame it ran 2 years ago .
  8. I have a 1950 Windsor Parts car . Will lok when I go out Kings32
  9. I have a rear mount off a 1930 Oakland do you still need one ? Kings32
  10. Mels in Ohio he made the ones I needed for 1916 Overland , price was right . Kings32
  11. I have one of them hanging on the wall of my shop . My daughter found it in a junk shop did not know what it was , Thank you all .Kings32
  12. Ti is a bb2 .The brass tag has no 2075son it
  13. Would only let me load one picture , heres the other carb Kings32
  14. I have these left over for a job we did . They have been rebuilt by a carb shop . One is a carter the other is a zenith . $ 175 plus shipping Kings32
  15. You looking for the intake , exhaust from the 30 31 Oakland engine ? if so I have one . Kings32
  16. I use Gas renew service in about 2 years it came lose and pluged up the hole system . Went back to the people that did the job and they told to get lost . wasn't that nice . Had a stainless tank made was about the same cost as the renew job no problems after that King32
  17. I retired 24 years ago. I adjusted a week before I retired . Terry your will injoy every day as long you don't mess up your other leg . King32. PS Iwas 50 when I retired .
  18. I have one like that on my 32 Chevy sedan Kings 32
  19. kings32

    1929 Ford

    A nice 1929 ford 4 door . Came to my shop out of long time storage ( 10 - 15 years ) . We cleaned the gas tank , new battery ,clean out the carb , new points rotor ,cap .Checked the brakes , like new . It is a older resto good interior . This car runs strong , shifts good with strong clutch . All fluids have been changed. The owner is asking 12.500 for it , has a good title ( Pa ) . The car is in my shop for the next month . After that it is going back to Pa .My cell is 410-404-4968 Kings 32 . Thank You Will not le me load pictures will try later
  20. But why discourge new members from trying there hand . ? We all started somewhere. It's like don't restore but buy from me . Kings32
  21. Why does people on here say it is to much to restore a car . there isn't many cars out there that you will get your money back . It is the joy you get from doing them your self and the people you met along the way . I have meet a lot of great people with this hobby . When you are through with this world you can't take anything with you but your memories . Enjoy . Kings32
  22. There was one with a car inside he was wondering if it was a 1916 and value . A number of responces to it . King32
  23. That would happen to me . Guess I will never get the chance to go there . My cars are just touring cars . Kings32
  24. There was a post about a 1916 Overland Roaster . I seen it and replyed about it , haven't seen it . Was it taken down ? Kings