1926 Chrysler 4 cylinder exhaust manifold

[Dazzo]

Can anyone help me?

 

I need a replacement exhaust manifold .1926 Chrysler 4 cylinder.

Intake manifold bolts to it.

 

Trying to get a 1926 Chrysler going down here in New Zealand.

 

Thanks in advance

 

Edited January 25, 2022 by Dazzo (see edit history)

[Big whale]

Send me a pm

[viv w]

Hi Dazzo,

As you are in New Zealand, I assume your car is right hand drive.

Be careful buying another manifold, as the right hand drive manifold may be different to the left hand drive one. The angle of the flange where the exhaust pipe bolts on may be different to clear the steering column and pedals. Check the casting numbers match your existing one, the Models 50, 52 and 58 may look the same but there are some differences.

 Those manifolds are prone to cracking in the area shown in your picture. Whether you weld your existing one or find a replacement, you will have to put a new gasket between the inlet and exhaust manifolds and get a machine shop to skim both together as a unit before mounting them onto your motor. If you do not skim the ports level you will risk cracking or breaking the manifolds.

Viv.