Rob B Posted July 18, 2021 Share Posted July 18, 2021 Hi All, I don’t have Brush hubs so I’m using latter T Fords front hubs . Has anybody else done this ? If you have can you tell me the size of the Timken bearings you used to fit the Brush axles. Any other advice around this would be greatly appreciated. Regards Rob Link to comment Share on other sites More sharing options...
Buzz68 Posted July 22, 2021 Share Posted July 22, 2021 Hope this helps On my 1912 Metz yes not same but same issue I measured the hub and spindle and actually found a metric ball bearing that is sealed no issues so far Had to make a spacer fill in distance for the old seal I get the timken # if the helps let me know Link to comment Share on other sites More sharing options...
Rob B Posted July 23, 2021 Author Share Posted July 23, 2021 Hi , Thanks for replying. Yes that’s helpful and yes send me the numbers please. Regards Rob. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now