Top pull-down wiring colors

[RobertLDuncan]

Can someone post a picture or wiring schematic showing colors of the wiring to the tin can relay on the pull-down drive for the top?

 

My wires got disconnected from the three way plug and I don't know how to properly reconnect them.

[JerryLG]

Robert, my pull down assembly has had two additional relays added at some point in the past. I have a black plastic cased relay and a silver metal relay. 

 

My silver relay has five connections. If you hold the relay with the three connections showing at the top and the two connections at the bottom,  the top connection wires from left to right are Gray which is grounded to the frame and also goes to the motor connector. The center connection has a green wire which goes to my second black relay. The right connection has a blue wire which goes to the power source, the motor, and to the black relay. The bottom left connection has a white wire going to the power source, the motor and to the black relay. The bottom right connection has nothing connected to it. 

 

The black relay has a blue wire on the top left connection going to the silver relay, a green wire on the top center connection going to the silver relay, and a brown wire on the top right connection going to the motor brown connection.. The bottom left connection has a white wire,  it goes to the white connection on the silver relay. 

 

I hope this helps. 

[RobertLDuncan]

Thanks Jerry, that is just the information I need.